Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Bmw e46 ms42 boot wont read
19-01-2018, 15:20 PM,
(This post was last modified: 14-09-2019, 03:44 AM by Clusters.)
Post: #1
|
|||
|
|||
Bmw e46 ms42 boot wont read
Hi
I need boot pin location on this ms42 ecu , I have for ms43 picture with boot pin location but its not same Here a pictures if someone can mark pin o picture Thanks ! Poslato sa ALE-L21 uz pomoć Tapatoka If I helped you please use -----> ,
|
|||
19-01-2018, 15:43 PM,
Post: #2
|
|||
|
|||
RE: Bmw e46 ms42 boot pin location need
Just use pin 24 of the AM29F400AB
|
|||
19-01-2018, 15:47 PM,
Post: #3
|
|||
|
|||
RE: Bmw e46 ms42 boot pin location need
Boot pin ==>pin 24 FlashEPROM 29F400 or pin 104 SAK-C167CR MCU
|
|||
19-01-2018, 16:21 PM,
Post: #4
|
|||
|
|||
RE: Bmw e46 ms42 boot pin location need
(19-01-2018, 15:47 PM)bram380 Wrote: Boot pin ==>pin 24 FlashEPROM 29F400 or pin 104 SAK-C167CR MCUPin104 ? Poslato sa ALE-L21 uz pomoć Tapatoka If I helped you please use -----> ,
|
|||
19-01-2018, 17:28 PM,
Post: #5
|
|||
|
|||
RE: Bmw e46 ms42 boot pin location need
Yes correct pin-104
|
|||
19-01-2018, 17:30 PM,
Post: #6
|
|||
|
|||
RE: Bmw e46 ms42 boot pin location need
(19-01-2018, 17:28 PM)bram380 Wrote: Yes correct pin-104Thanks my friend Do you have xdf files for ms42 for share when I read ecu 512kb file and check softwareversion? For tuner pro need Poslato sa ALE-L21 uz pomoć Tapatoka If I helped you please use -----> ,
|
|||
20-01-2018, 17:52 PM,
(This post was last modified: 20-01-2018, 18:32 PM by Nemanja.)
Post: #7
|
|||
|
|||
Bmw e46 ms42 boot pin location need
First time booting this ecu so I cant get this ecu to boot mode
Tell me if I do something wrong here instruction what I use for 512kb read http://www.autonumen.com/blog/2015/11/20...-ms43ms42/ What I did : Connected all pins on ecu like on instruction I connected pin 7 and 26 on ecu ( power pins) then I connected on black socket + of galleto 1260 , then connect all them to 12v + battery Gnd pin 4 connected on ecu like on picture , I connected boot pin with gnd wire and on boot pin 104 , than connect all them to black socket minus ( - ) of galleto 1260 and on battery minus K line pin 32 connected on ecu like on picture , and on white socket K on galleto 1260 When I power this I have power on galleto light go on , after 6 sec I remove boot wire from pin like in instruction try to.connect and I got error ecu not in boot mode I use JM garage flasher like in instruction I do somethings wrong? Poslato sa ALE-L21 uz pomoć Tapatoka (19-01-2018, 17:28 PM)bram380 Wrote: Yes correct pin-104I.make mistake friend in connecting wires? If I made mistake please write me rught way for connection wires im bad in english Poslato sa ALE-L21 uz pomoć Tapatoka If I helped you please use -----> ,
|
|||
20-01-2018, 19:56 PM,
Post: #8
|
|||
|
|||
Bmw e46 ms42 boot pin location need
Anyone ?
Poslato sa ALE-L21 uz pomoć Tapatoka If I helped you please use -----> ,
|
|||
20-01-2018, 22:21 PM,
(This post was last modified: 20-01-2018, 22:26 PM by Nemanja.)
Post: #9
|
|||
|
|||
Bmw e46 ms42 boot wont read
Maybe help
Poslato sa ALE-L21 uz pomoć Tapatoka If I helped you please use -----> ,
|
|||
20-01-2018, 23:39 PM,
(This post was last modified: 20-01-2018, 23:41 PM by Enabled.)
Post: #10
|
|||
|
|||
RE: Bmw e46 ms42 boot wont read
|
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content