Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
15-02-2018, 09:44 AM,
Post: #21
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
Load again r56.prg and try i_stufe_schreiben with "R056-10-03-503;R056-10-03-503;R056-10-03-503" (without the quotes"") or with "R056-10-06-500;R056-10-06-500;R056-10-06-500".
It should work normally. |
|||
15-02-2018, 11:43 AM,
Post: #22
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
Thanks blax123,
Its worked! I realise now that I had an extra space after each semi-colon (. My mistake. I have set apiJob("R56","i_stufe_lesen","R056-10-03-501;R056-10-03-501;R056-10-03-501","") as per your first note. A I right in thinking I can use ISAT/P now? Bearing in mind I am trying to retrofit the Champ 2 CIC into the Pre-LCI R56? Thanks again for your help, I click the thanks button too for your help to date. |
|||
15-02-2018, 11:47 AM,
Post: #23
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
(15-02-2018, 11:43 AM)russellg Wrote: Thanks blax123, Open ISTA-D/ISTA+ and check now if it shows your CIC-Mid or still shows the CCC. If it shows the CIC-Mid you should be good to go with Ista-P. Fingers crossed for you! |
|||
15-02-2018, 18:08 PM,
(This post was last modified: 15-02-2018, 18:39 PM by russellg.)
Post: #24
|
|||
|
|||
Flash R56 Champ2 CiC with ISTA
(15-02-2018, 18:08 PM)russellg Wrote: The car originally had a CCC, i'm going to try Same error. Cant progress in ISTA/P The central gateway is clearly not operating correctly: All downline control units are not responding Anyone have any ideas? Thanks (15-02-2018, 18:08 PM)russellg Wrote: Okay, |
|||
15-02-2018, 19:19 PM,
Post: #25
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
62 MOSTGW OKAY 9290218 CH62F1
63 MASK/CCC OKAY 9290212 CH63F1 92 VIRTSG92 OKAY 9233590 9B VIRTSG9B OKAY 9248629 CH9BF1 New 9290231 A0 CCC OKAY 9290230 CHA0F1 |
|||
15-02-2018, 22:18 PM,
Post: #26
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
You flashed it for nothing.
Intel's patch only works with CIC and not CHAMP2. Regards Sima |
|||
16-02-2018, 07:35 AM,
Post: #27
|
|||
|
|||
Flash R56 Champ2 CiC
(15-02-2018, 19:19 PM)hojo29 Wrote: 62 MOSTGW OKAY 9290218 CH62F1 Thanks hojo29, I wish I picked up on that when you mentioned it back in Post #17. I'm currently flashing 9B, is 92 able to be flashed too? (15-02-2018, 22:18 PM)simaservis1108 Wrote: You flashed it for nothing. Thanks Sima, I realise that now after blax123 advised that back in Post #6. Worth capturing it here again though in case any future users are thinking of flashing the Champ2 for INTEL123's method before reading SweetBMW's 'How to'. |
|||
20-02-2018, 09:00 AM,
Post: #28
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
Hello
I connect to this post on the R60 of 2010 the Champ has been turned off after IstaP update failed I updated the following controllers successfully with winkfp (CH63F1, CH62F1, CHA0F1) but the monitor remains off, I forgot some module, the gateway for example? I thank those who answer |
|||
20-02-2018, 09:18 AM,
Post: #29
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
(20-02-2018, 09:00 AM)smercki Wrote: Hello Hello smercki, Is your champ cooling fan spinning continuously? Does you car beep when tbe key is inserted? Does the radio work despite the CID monitor being blank? Is your Champ factory supplied or retrofit? |
|||
20-02-2018, 09:27 AM,
Post: #30
|
|||
|
|||
RE: A difficult problem - Flash R56 Champ2 CiC with WinKFP - what is address 92 and 9B?
(20-02-2018, 09:18 AM)russellg Wrote:(20-02-2018, 09:00 AM)smercki Wrote: Hello thanks for the quick answer! black monitor, no sound from the radio and no buttons work, the cooling fan runs continuously, factory present, no retrofit |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Winkfp cannot read uif | MPTeam | 7 | 219 |
27-04-2024, 19:07 PM Last Post: MPTeam |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,477 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA | FSCmap | 184 | 53,648 |
24-04-2024, 14:49 PM Last Post: Bag3ban1 |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,781 |
22-04-2024, 11:44 AM Last Post: kwat |
|
CHAMP2 Emulator Nav | BimmerLubuskie | 2 | 163 |
19-04-2024, 20:57 PM Last Post: miskoh |
|
Flash CAS 3 for disable ELV | UnFan | 3 | 232 |
19-04-2024, 08:20 AM Last Post: ravager |
|
Flash MPPK software 20D B47 (Esys) | ruben_17non | 5 | 600 |
10-04-2024, 21:38 PM Last Post: ruben_17non |
|
BMW E60 coding problem | GarageX | 8 | 362 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
BMW G8x M3/M4 CSL EGS flash | weby | 22 | 3,685 |
31-03-2024, 19:48 PM Last Post: Erezbmwm |
|
m2 g87 csl flash | Erezbmwm | 0 | 141 |
31-03-2024, 18:46 PM Last Post: Erezbmwm |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content