[Bimmer540]

what is the newest blp and sdp?

4.10.30

4.10.31

BMW_ISPI_ISTA_DELTA-SDP_4.10.30.istapackage why 4.10.31?

Sorry your right!

[jeroenbmw]

Hello,

I have a question, i have installed standalone 4.10.20 with all latest SQL and pszdata.

If i want to install stand alone 4.10.30 is it nessesary to everytime when i change ISTA-D version to load all SQL and daten again?

Now i normally delete complete Rheingold directory clean register, and than paste standalen on c:\rheingold, and after that load all SQL ant pszdaten again.

If there is a shorter solution i am happy if someone can share it

Thanks

[inspi1981]

You keep old SQlite+PSdZ folder and then just update with delta. Also registery must correspond

[Stromag]

In earlier versions it was possible to find a precise description of the error under "Input error code".
This is no longer possible with the newer versions.

Does anyone know if this can be activated again?

[spider80]

In earlier versions it was possible to find a precise description of the error under "Input error code".
This is no longer possible with the newer versions.

Does anyone know if this can be activated again?

U mean error code ISTA find but no information what to do with it ?

[BaggieMatt]

In earlier versions it was possible to find a precise description of the error under "Input error code".
This is no longer possible with the newer versions.

Does anyone know if this can be activated again?

U mean error code ISTA find but no information what to do with it ?

This problem started happening with version 4.05.23 I think and then was solved with version 4.7.13. It seems to have happened again.

If you start ISTA+ and put in a VIN or go through basic features. If you go to troubleshooting and then input fault code you will get a list at the bottom OK.

The problem is if you try and look at a code where the show fault code button is on and not greyed out then you can't click on it and see more details.

If you try 2CA2 you should see what I mean. The top fault has the button greyed out but the second one down is bold but cannot be clicked to provide greater detail on the fault even though the cursor changes to a finger to show you should be able to click on it.

[Stromag]

In earlier versions it was possible to find a precise description of the error under "Input error code".
This is no longer possible with the newer versions.

Does anyone know if this can be activated again?

U mean error code ISTA find but no information what to do with it ?

This problem started happening with version 4.05.23 I think and then was solved with version 4.7.13. It seems to have happened again.

If you start ISTA+ and put in a VIN or go through basic features. If you go to troubleshooting and then input fault code you will get a list at the bottom OK.

The problem is if you try and look at a code where the show fault code button is on and not greyed out then you can't click on it and see more details.

If you try 2CA2 you should see what I mean. The top fault has the button greyed out but the second one down is bold but cannot be clicked to provide greater detail on the fault even though the cursor changes to a finger to show you should be able to click on it.

Exactly, I get if I enter the error code the several errors indicated.
Can also select this but no details appear.
Even if I then click on error code ads nothing is happening.
The only thing I can do is delete the error codes

[Stromag]

If you want to work without SDP and BLP on other PC, then you have to remove the thickly marked values ​​from the Reg ("LogisticBaseVersion" = "4.10.30" and "SWIData" = "4.10.30") or is it enough to set "True" to "False"?


Windows Registry Editor version 5.00

[HKEY_LOCAL_MACHINE \ SOFTWARE \ WOW6432Node \ BMWGroup \ ISPI \ ISTA]
"ProductVersion" = "4.10.30.15635"
"MainProductVersion" = "4.10"
"DataVersion" = "4.10.31"
"DataVersion_en-GB" ="4.10.31"
"LogisticBaseVersion" = "4.10.30"
"SWIData" = "4.10.30"

[HKEY_CURRENT_USER \ Software \ BMWGroup \ ISPI \ Rheingold]
"BMW.Ringold.CoreFramework.PrintingType" = "DIALOG"

[HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ BMWGroup \ ISPI \ Rheingold]
"BMW.Ringold.Programming.ExpertMode" = "False"
"BMW.Rheinold.Programming.Enabled" = "False"
"BMW.Reingold.Programming.PsdzDataPath" = ".. \\ .. \\ .. \\ PSdZ \\ data_swi"

[jamiem1987]

where can i find the 4.10.30 sdp and blp files?

thank you

[Almaretto]

where can i find the 4.10.30 sdp and blp files?

thank you

It is pinned as an important thread.