Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot Boxer 2013 new ECU Programing
07-06-2018, 10:14 AM,
Post: #1
|
|||
|
|||
Peugeot Boxer 2013 new ECU Programing
I have Peugeot Boxer 2013, i buy new ECU (not programed yet) and install it to the car.
I have 3 questions :- ***************** 1) Does the pin code of BSI is required in this process ? 2) Does the BSI's pin code which using to program the key is the same pin code of BSI which is used to program the new ECU ? 3) How can i program it to the car ? I see video entering injectors item then choose some configuration for A/C and other items .... Is this the right way ? |
|||
07-06-2018, 13:17 PM,
Post: #2
|
|||
|
|||
RE: Peugeot Boxer 2013 new ECU Programing
(07-06-2018, 10:14 AM)adel.nooh Wrote: I have Peugeot Boxer 2013, i buy new ECU (not programed yet) and install it to the car. After married BSI with ECU go to ecu and telecoding parameters PSA Group File Service Solutions, Support & More
Half-knowledge is worse than ignorance |
|||
08-06-2018, 18:36 PM,
Post: #3
|
|||
|
|||
RE: Peugeot Boxer 2013 new ECU Programing
I make the car work yesterday with the new ECU... I use many scanners with no response to any module except lexia3... The following steps what i did.:
1. I use lexia3 and choose boxer3 and i have no response to any modukes just like autel and x100 pad2. 2. I choose boxer3 Euro.. Now i got response to some modules like BSI, ECU is detected with title ECU not recognized. 3. I choose repair then ECU then package repair then Replacement ECU. 4. I connect old ECU as the instructions says then press next and connect new ECU again and press next and wait 300 seconds (5 min). 5. Then i begin to code the injectors... I got the codes from injector itself, each code consist of 6 chaecters (letters or numbers) It takes 60 seconds make switch off and on twelve times each one consume 5 seconds. 7. After that i finish the programing and go to configuration and choose if there is cruise control or A/C. 8. Now i delete the errors and run the car. I didnt enter vin or pin code or sync ECU with BSI... I dont know if i missing something or not but the title of ECU not recognized still exist even the car is working now |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
peugeot 407 bsi -s02-00 95128 virgin | jokerk78 | 1 | 11 |
51 minutes ago Last Post: aboelgood |
|
Solved ✔ Peugeot 207 MEV17.4 immo off | acom | 2 | 54 |
11 hours ago Last Post: acom |
|
Peugeot ecu dump pin request | buhuhu | 1 | 33 |
Today, 06:01 AM Last Post: dabaca |
|
Solved ✔ Peugeot 308 1.6 HDI Immo off. | motor man | 5 | 149 |
13-05-2024, 21:09 PM Last Post: motor man |
|
Solved ✔ PEUGEOT 307 immo off | dankocg | 5 | 99 |
11-05-2024, 00:51 AM Last Post: Abou-raffik |
|
Solved ✔ Peugeot 407 SID803 immo off | voytek | 2 | 76 |
10-05-2024, 10:01 AM Last Post: voytek |
|
Solved ✔ Peugeot 407 SID 803 Immo off | NikolaIMRS | 2 | 72 |
08-05-2024, 17:41 PM Last Post: NikolaIMRS |
|
Peugeot 508 BSI Q04 | amaflo | 2 | 75 |
07-05-2024, 07:23 AM Last Post: raffy haddad |
|
Peugeot 207 - MEV17.4 - VIRGIN | KMH | 1 | 57 |
06-05-2024, 18:59 PM Last Post: davinci_86 |
|
virgin BSI peugeot 407 | pistolo30 | 3 | 94 |
28-04-2024, 17:41 PM Last Post: rhj |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content