Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ DME Replacement 2012 F10 M5 with a used DME
19-07-2018, 20:05 PM,
(This post was last modified: 24-07-2018, 00:52 AM by Clusters.)
Post: #1
|
|||
|
|||
DME Replacement 2012 F10 M5 with a used DME
Hi everyone I have a 2012 BMW F10 M5 USA. A shop has determined that the DME/DDE Has failed to send spark to cylinder #4.
I have purchased a DME used on Ebay. It has a VIN Number from another car in it. Can someone guide me on how to replace this unit? I have ENET and ISTA-P working on my laptop, is this software ok to replace this unit? Is their any other way to do this? DME ECU Control Unit MEVD1728 Thanks! |
|||
19-07-2018, 21:08 PM,
Post: #2
|
|||
|
|||
RE: DME Replacement 2012 F10 M5 with a used DME
No you cannot do this with any dealer software. You need third party DME cloning tools or EEPROM readers to do this because of the CAS - DME rolling codes, which is if i remember correctly, pretty heavily encrypted in these DMEs.
| BimmerFiks AS | Instagram | F20 114i - Alpine Weiss Retrofits: 609 - 6NS - 6CP - 6WA - 6NW - 674 - - |
|||
19-07-2018, 21:43 PM,
Post: #3
|
|||
|
|||
RE: DME Replacement 2012 F10 M5 with a used DME
ok that's what I thought because it just wouldn't work with this ISTA-P. Even when I tried to process "Replace Control Unit" it did not recognize that I installed the used DME.
If you or someone can point me in the right direction I would greatly appreciate it. this customer is been waiting 4+ months...long story I have seen Autohex II from Microtech but it looks like I need to buy a 2300.00 ICOM connector. I do not have that money. I paid 399.00for the used DME. Thanks again! |
|||
20-07-2018, 11:45 AM,
Post: #4
|
|||
|
|||
RE: DME Replacement 2012 F10 M5 with a used DME
(19-07-2018, 21:43 PM)muranoone Wrote: ok that's what I thought because it just wouldn't work with this ISTA-P. Even when I tried to process "Replace Control Unit" it did not recognize that I installed the used DME. You need buy ktag, i think then you can clone this ecu. Ktag can read mpc and eeprom. |