[MOMOSAM]

Hello.
I installed Xentry / DAS as intended by the intro. DAS is launched in German. How do I install Russian for DAS? I'm using Windows 7 SP1 64bit Russian. Thank you.

Change language to Russian in Xentry then choose any model that uses DAS and start DAS from there.

Then you will see DAS language has changed to Russian.

[pesona]

@joegrohe
hi,
if you want to spare a little bit time, there is a ready made xdos image created by crazy40. it is free and a good quality too.
you can start with that. change only the license key.
if you don't understand, you can ask here. this thread is indeed an education for beginners.

[joegrohe]

@joegrohe
hi,
if you want to spare a little bit time, there is a ready made xdos image created by crazy40. it is free and a good quality too.
you can start with that. change only the license key.
if you don't understand, you can ask here. this thread is indeed an education for beginners.

Thank you very much for the response. I need to know how to communicate with my multiplexer, I have tried new cable and 2 computers but it keeps saying connection not possible. I team viewed my supplier he set all the IP address and said it should work but it is not. Everything else work Xentry, EPC, WIS. I just can figure out how to get communication with my C4 multiplexer. Any advice or help would be appreciated.

[MOMOSAM]

@joegrohe
hi,
if you want to spare a little bit time, there is a ready made xdos image created by crazy40. it is free and a good quality too.
you can start with that. change only the license key.
if you don't understand, you can ask here. this thread is indeed an education for beginners.

Thank you very much for the response. I need to know how to communicate with my multiplexer, I have tried new cable and 2 computers but it keeps saying connection not possible. I team viewed my supplier he set all the IP address and said it should work but it is not. Everything else work Xentry, EPC, WIS. I just can figure out how to get communication with my C4 multiplexer. Any advice or help would be appreciated.

Give me TV I will have a go and see where the problem is

[joegrohe]

@joegrohe
hi,
if you want to spare a little bit time, there is a ready made xdos image created by crazy40. it is free and a good quality too.
you can start with that. change only the license key.
if you don't understand, you can ask here. this thread is indeed an education for beginners.

Thank you very much for the response. I need to know how to communicate with my multiplexer, I have tried new cable and 2 computers but it keeps saying connection not possible. I team viewed my supplier he set all the IP address and said it should work but it is not. Everything else work Xentry, EPC, WIS. I just can figure out how to get communication with my C4 multiplexer. Any advice or help would be appreciated.

Give me TV I will have a go and see where the problem is

ID 1 014 994 224
PW 5rk37g
I will have it open all day connected to a sprinter. Thank you for your assistance

[abdelamjid]

hello to all thank you for sharing

i have 2 interface ( VAS5054A and ACTIA-XS passthru )

plz
can you help me how to install this soft??

best regards

[motorotor]

Hello.
I installed Xentry / DAS as intended by the intro. DAS is launched in German. How do I install Russian for DAS? I'm using Windows 7 SP1 64bit Russian. Thank you.

Change language to Russian in Xentry then choose any model that uses DAS and start DAS from there.

Then you will see DAS language has changed to Russian.

Thank you for the information. Everything turned out, but for some reason it was not the first time. Now everything works, thanks.

[pesona]

@abdelamjid
for your case, download xentry passthru and do install from step 1-10.

Good luck

[motorotor]

Has anyone been able to solve the problem of installing the Standalone Startkeycenter? I start the installation of the Standalone Startkeycenter, the splash screen appears for 3 seconds and disappears, nothing else happens. I read the whole topic and people had the same problem but I did not find a solution. I'm using Windows 7 SP1 64 to be Russian and XENTRY XDOS 07.2018
How to be? Thanks.

[MOMOSAM]

Hello.
I installed Xentry / DAS as intended by the intro. DAS is launched in German. How do I install Russian for DAS? I'm using Windows 7 SP1 64bit Russian. Thank you.

Change language to Russian in Xentry then choose any model that uses DAS and start DAS from there.

Then you will see DAS language has changed to Russian.

Thank you for the information. Everything turned out, but for some reason it was not the first time. Now everything works, thanks.

Now please click on thanks and reputation if I helped