Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO serial connection pins for EEPROM access
|
23-10-2018, 18:22 PM,
Post: #1
|
|||
|
|||
|
NBT EVO serial connection pins for EEPROM access
Ok I have most of it sorted out in order to recover failed bootloader and other sh1t
Now I need to know the proper connection pins. PIN3 is TX PIN4 is RX PIN1 is what? Minus or Plus? 4th pin is what number please and then is it Plus or Minus Thanks in advance |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
15-11-2018, 22:14 PM,
(This post was last modified: 15-11-2018, 22:18 PM by Vias.)
Post: #2
|
|||
|
|||
|
RE: NBT EVO serial connection pins for EEPROM access
You need use only two pins (3 and 4) and you can connect to ground where it is convenient you.
I used a modified rj45 socket for connection without solder. |
|||
|
|
|
01-12-2018, 16:58 PM,
Post: #3
|
|||
|
|||
RE: NBT EVO serial connection pins for EEPROM access
|
|||
|
|
|
03-12-2018, 21:58 PM,
Post: #4
|
|||
|
|||
|
RE: NBT EVO serial connection pins for EEPROM access
Doesn't look good. But it was made in a few minutes and useful for me.
|