[nimametal]

I have the same issue,can you explain the solution?

have to
1. disable Sanity Check
2. ...

[Knowme2k]

hey i have the same issue,

nbt evo is patched but always the plain error when try coding... its US car with ECE navi... could somebody help with FA ?

best regards

[mr_nitroz]

I have the same problem. Tried to code US NBT EVO to EU with modified EU VO but same error and no signal on screen.
So I coded it back with original VO - worked and then try to modify at least manually some parametres to get local language but same error. Now I can’t even code the EVO back to original VO. I tried to force sw update on all EVO parts as bootloader, iba, sw - no joy.
Can the unit be patched to VO code US EVO to EU version even the unit is in this state? (No cafd available) In ISTA it shows HU not coded properly error. Nothing about active protection.

[FSCmap]

For conversion US to ECE H/B units US version need to specially patched.
In other case you will get a black screen.
We call that REGION CHANGE for NBTevo.
You will need to use it once, when you convert it ECE.