Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MINI EMS2K - MS5150 - EWS3
16-12-2018, 10:48 AM,
Post: #1
|
|||
|
|||
MINI EMS2K - MS5150 - EWS3
Hello Guys,
i got a MINI Cooper S R53 preFL with a EMS2K DME and EWS3. I want to Switch to the Facelift DME MS5150 to flash the GP1 Software. How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need? And which Tools/Software i need to flash a Software on the Bench using Winkfp and Code it afterwards with NCS? Will CantieCar do this job? Best Regards |
|||
31-12-2018, 11:23 AM,
Post: #2
|
|||
|
|||
RE: MINI EMS2K - MS5150 - EWS3
I don't think it is possible via OBD. I guess CanTieCar can't emulate KTAG or any other programmer that does BDM on EMS2K.
It might be easier to transfer the ISN from EWS using AK90 or XProg, very simple and cheap process. The VIN in the ECU will still be incorrect but that doesn't stop it from working. |
|||
31-12-2018, 13:02 PM,
Post: #3
|
|||
|
|||
RE: MINI EMS2K - MS5150 - EWS3
(16-12-2018, 10:48 AM)blax123 Wrote: How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need?You need to read the whole 29f400 flash memory. There are a lot of tools that support this ECU. AFAIK, even old Galletto reads the full flash. (16-12-2018, 10:48 AM)blax123 Wrote: And which Tools/Software i need to flash a Software on the Bench using Winkfp and Code it afterwards with NCS? Will CantieCar do this job? Well you already answered your own question. WinKFP and a OBD cable. EMS2K and MS5150 are directly connected to DIAGBUS. It's K-Line, not CAN-Bus so no need for a Gateway. My two cents: Why MS5150? All the required changes for more power or even GP1 maps can be flashed to EMS2K... |
|||
31-12-2018, 13:43 PM,
Post: #4
|
|||
|
|||
RE: MINI EMS2K - MS5150 - EWS3
(31-12-2018, 13:02 PM)o-dog Wrote:You can read the entire flash, but can you also write the ISN with Galletto and/or other OBD tools? In my experience they read everything but only write the tune.(16-12-2018, 10:48 AM)blax123 Wrote: How can i transfer the ISN from the EMS2K to the MS5150? Which Tools/Software do i need?You need to read the whole 29f400 flash memory. There are a lot of tools that support this ECU. AFAIK, even old Galletto reads the full flash. |
|||
31-12-2018, 15:04 PM,
Post: #5
|
|||
|
|||
RE: MINI EMS2K - MS5150 - EWS3
I found out, that SMOK UHDS is able to read and write eprom and flash via OBD.
Found the Pins i need for 12v/Ground/K-Line. So dont need to open and read via bootmode. Someone knows at which adress the ISN is located? I think Galetto reads Full File without ISN like MS42/43? Yeah, just for switching to GP1 Soft. How to flash the GP1 Soft on a EMS2K? This would be a life safer for me. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW/Mini strange EPS part number | Alyn546 | 4 | 67 |
8 hours ago Last Post: Alyn546 |
|
Mini F55 EPS 4822F7 error | Alyn546 | 19 | 245 |
Yesterday, 22:09 PM Last Post: Node |
|
VO required for Mini Cooper S 2004 | DirkP35 | 0 | 48 |
13-05-2024, 20:28 PM Last Post: DirkP35 |
|
FRM3 MINI eee solution | ArcziArcz | 4 | 223 |
11-05-2024, 07:58 AM Last Post: Dash_Burner |
|
mini f60 countryman, mileage issues red dot after cluster replacement | deutsch | 6 | 218 |
08-05-2024, 11:15 AM Last Post: EngineerX |
|
Mini Tooth to mechanical code | koziol | 0 | 113 |
14-04-2024, 14:27 PM Last Post: koziol |
|
MINI R60 .SSD-File COAPI-1000 | bmw335coding | 0 | 77 |
11-04-2024, 14:56 PM Last Post: bmw335coding |
|
MINI CIC retrofitted need help with FSC activations | hipolitogt | 3 | 168 |
01-04-2024, 10:04 AM Last Post: hipolitogt |
|
mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom | matiz | 10 | 1,609 |
22-03-2024, 11:47 AM Last Post: urgi |
|
SSD Request Mini R55 | kimz | 2 | 154 |
02-03-2024, 08:36 AM Last Post: kimz |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content