Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Problem coding IHKA module with Ista P and WINKFP
|
07-01-2019, 06:37 AM,
(This post was last modified: 15-02-2019, 17:16 PM by Clusters.)
Post: #1
|
|||
|
|||
Problem coding IHKA module with Ista P and WINKFP
Hello.....I have a BMW e 60 nfl 2005 i did a CIC Retrofit and a climate control unit IHKA from an LCI version.I had high climate even before retrofit.Everything works ok but i just wanted to change and update the software of the climate control IHKA.I tried with winkfp but i can not find the zusb 9177717 ,tried that even manually to search in gdaten and nothing always getting an error about the file.I did tried with Ista P Expert mode but it tried to program more modules and i want just one top program.I deselect the other and always the program select them back It tries to program code the module and after a while it put a green ok sign and it started again.I thing is a configuration issue .Do you guys have any idea?I am using an ICOM.How do you update spdaten for winkfp using standard tool to inject or inject them using winkfp?Thank you
|
|||
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
07-01-2019, 07:03 AM,
Post: #2
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
load corect files into kfp and flash it in expert mode or you can try enable force programing in comfort..
|
|||
|
07-01-2019, 21:52 PM,
Post: #3
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
Load sp-daten in winkfp. Select prog-zb update in comfort mode, then put in your VIN, then click update. After programming run NCS expert, change the time criterium (#0909), the code ihka. You connected the extra wires?
|
|||
|
07-01-2019, 21:59 PM,
(This post was last modified: 07-01-2019, 22:02 PM by ovidiubuzzi.)
Post: #4
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
I just modified the pin 21 .....everything else is like before
How do you know which are the corect file if i can not find the 9177717....should i chose the closest number to this one? |
|||
|
07-01-2019, 22:10 PM,
Post: #5
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
|
|||
|
07-01-2019, 22:13 PM,
Post: #6
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
Ok thank you i will try and post result. By the way how did you chose that file from all the file are listed there?.Thank you
|
|||
|
07-01-2019, 22:20 PM,
Post: #7
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
|
|||
| Reputation: +1 - ovidiubuzzi [+1] | |||
|
07-01-2019, 22:22 PM,
Post: #8
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
Thank you so much !
|
|||
|
09-01-2019, 12:40 PM,
(This post was last modified: 09-01-2019, 12:48 PM by ovidiubuzzi.)
Post: #9
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
Where can i find the *.HIS file?
I opened the *.HIs file with notepad. The 1st column is old program number, the second is the new. [/quote] Where can i find the *.HIS file? I opened the *.HIs file with notepad. The 1st column is old program number, the second is the new. [/quote] OK i found it ....Thank a lot for your answer! |
|||
|
13-01-2019, 08:51 AM,
Post: #10
|
|||
|
|||
|
RE: Problem coding IHKA module with Ista P and WINKFP
O so here is where i run in to another problem:try to flash with the zubs number that you told me but i get error 106 where it does say that 15IHKH60.IPO not found.Try to search manualy in the folder data SP DATEN 60 but could not find the file.So in this case how am i supposed to update the module?Thank you
|
|||
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
