Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
18-02-2019, 00:03 AM,
(This post was last modified: 18-02-2019, 00:13 AM by smilo.)
Post: #1
|
|||
|
|||
NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
Hi,
For some EVO ID5 installed with NBT CID and 8.5V converter, the CID sometimes stays black when the system starts. It happens randomly - I tested the converter (and replaced it even if it works..), but for some cars the problem persists. Must switch the ignition off, then switch it On few second later, before the screen starts. The measured voltage in the screen input is stable at 8.6V. No one had this problem ? |
|||
18-02-2019, 08:47 AM,
Post: #2
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
(18-02-2019, 00:03 AM)smilo Wrote: Hi,Use voltage converter that you can regule it to 8V , after puting converter to 8V didnt get this problem any more
|
|||
18-02-2019, 09:00 AM,
Post: #3
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
(18-02-2019, 08:47 AM)sameur10 Wrote:(18-02-2019, 00:03 AM)smilo Wrote: Hi,Use voltage converter that you can regule it to 8V , after puting converter to 8V didnt get this problem any more Thanks - So do you confirm that you got this problem yourself, resolved by setting the converter to 8V ? |
|||
18-02-2019, 20:13 PM,
Post: #4
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
I also had this problem after updating with newer I-Level than 64.2 (should be 03-2018). After flashing back to 64.1 I never had that problem.
|
|||
19-02-2019, 01:55 AM,
Post: #5
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
(18-02-2019, 00:03 AM)smilo Wrote: Hi, I had this same issue on Istep 07/18. I flashed my unit to 03/18 and I have not had any issues. Car systems should put this in their enbt pdf. |
|||
19-02-2019, 11:52 AM,
Post: #6
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
I flash them all with 18-07-530. 75% of HU have no problem
I will try to use older ilevel |
|||
21-02-2019, 17:02 PM,
(This post was last modified: 21-02-2019, 17:06 PM by reclaim.)
Post: #7
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
|
|||
21-02-2019, 23:45 PM,
Post: #8
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
(21-02-2019, 17:02 PM)reclaim Wrote:(19-02-2019, 11:52 AM)smilo Wrote: I flash them all with 18-07-530. 75% of HU have no problem The problem happens only with some recent CIDs APIX1 For the moment I haven't tried to downgrade yet. Don't hesitate to share your experience if you do will it from your side. |
|||
22-02-2019, 09:52 AM,
Post: #9
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
I've got the same problem on 18-03 and 18-07 too, downgrade to 17-11 solved all my problem (but losing CarPlay full screen )
|
|||
22-02-2019, 10:28 AM,
Post: #10
|
|||
|
|||
RE: NBT2 ID5 + CID APIX1 + voltage Converter: sometimes black screen
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,133 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
APIX1 black screen fix for 23-07 EVO HW2.3 | superwofy | 22 | 1,898 |
24-04-2024, 06:29 AM Last Post: sambir |
|
Screen Mirroring not working on EVO | painsage | 5 | 314 |
10-04-2024, 15:05 PM Last Post: painsage |
|
NBT ID3 screen on ID4 flashed to ID6 | Driss2 | 2 | 248 |
27-03-2024, 11:46 AM Last Post: RuleNormaliai |
|
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 322 | 124,253 |
24-03-2024, 23:45 PM Last Post: armenh7 |
|
BMW F25 screen change | m4rrtin | 1 | 183 |
25-02-2024, 19:36 PM Last Post: Bakica |
|
APIX1 screen with touch ? | oros | 1 | 213 |
25-02-2024, 19:03 PM Last Post: zero9 |
|
NBT2 VO coding locked | TIGHTFIN | 11 | 1,061 |
20-02-2024, 17:21 PM Last Post: DEJMIEN |
|
Coding normal Cluster to Black Panel X1 F48 | SteelFK1 | 7 | 444 |
10-02-2024, 18:07 PM Last Post: BMWzone |
|
Solved ✔ Cas3 black disable elv | sokisoki3 | 6 | 616 |
25-01-2024, 11:35 AM Last Post: sokisoki3 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content