Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BKD Remap: 373,4nm Torque Limit??!
22-02-2019, 19:10 PM,
(This post was last modified: 22-02-2019, 21:41 PM by DieselBoost.)
Post: #1
|
|||
|
|||
BKD Remap: 373,4nm Torque Limit??!
Hey all,
so i have been working on a file for the 2.0 BKD for some time, and I'm getting quite satisfied with it now. However: i have been running a lot of logs, and i am having some torque limit at 373,4 nm. Can anyone have a look in my file and see what's wrong?! I have also attached the VCDS multi-log. I have raised and recalibrated all diagnostic limits for boost (Max 2800 mbar now) IQ (Max 85 mg/st now) and Torque (Max 520 NM now). The Gearbox (DSG) is not limiting i suppose, since i have raised that torque limiter to 500 nm. Know the boost is still having some spikes, still dialing the N75 map in.. But almost there! Any help would me much appreciated! Been looking for hours now and can't find it. Thanks in advance. Thx+ rep for all good answers. |