Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Yanhua mini ACDP programming tool
19-09-2018, 08:58 AM,
(This post was last modified: 19-09-2018, 09:31 AM by sunshine2018.)
Post: #21
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
(31-08-2018, 16:22 PM)Chriz Wrote: But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer The newest version (09-19-2018)ACDP with improved CAS3 and CAS4 board fix the problem that it’s difficult to place the probes correctly. (13-09-2018, 08:32 AM)milkyway Wrote: For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won't need the electric bridges any more, it is easy to use. |
|||
05-02-2019, 02:48 AM,
Post: #22
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I am getting this tool but i have a question
1. Can i use it with PC without a wifi network? 2. Can it be used without internet or that is a necessity |
|||
28-02-2019, 08:32 AM,
Post: #23
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
Arrived, set up and ready to go. Wifi a necessity, managed to connect to my PC too.
|
|||
02-03-2019, 03:55 AM,
Post: #24
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I have tested the tool
1. Seems easy to fix CAS bridge. Read two CAS3+ 0L15Y. OK. 2. Attempted to make key all keys lost by ISN but key does not work. Tried by 64 attempt method but that process has a flow. At no point does it ask to write dump back to CAS though it needs CAS installed back to car. All this on bench so ill play some more 3. Key frequency detection does not work for me. Following up with support. Its a lovely tool if it could improve on its weaknesses. I use PC exclusively. I tried with key i virgined with vvdi pro. Will try one more time. |
|||
02-03-2019, 09:53 AM,
Post: #25
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
CAS3 board is easy to install
CAS4 board is a bit tricky both working good with mileage reset Adding key on CAS3/3+ with working key works good, but you have to add on 4th place, when i try to use place 1-3 the app returns to place selection... (tested with some china keys) FEM/BDC Mileage reset is also working good, for eep reading use a clamp instead of puncture socket, that cames with the device. tested adding key on CAS4 but it was not working, dont know if it was ACDP problem or china key problem RF Test is working good, tested some key (VW, audi, porsche) but tested without app only with RF test adapter |
|||
07-03-2019, 13:33 PM,
Post: #26
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
(02-03-2019, 09:53 AM)Chriz Wrote: CAS3 board is easy to install -------------------------------------------------- Nice to see someone with the tool!! Read ISN OBD on F10 N55 engine. Perfect. Read ISN on MEVD172 open ECU perfect. Ill try another key, all keys lost with ISN. I tried using the key BV to test frequency. Are you using the same or the black frequency adapter? Is that sold separately? Tried the key renew functionality? Mine does not work for third party keys, but works for a key made with the tool and for which eeprom dump available |
|||
07-03-2019, 18:13 PM,
Post: #27
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
Just tried CAS3+ with spare key available. 100% ok
|
|||
07-03-2019, 19:40 PM,
(This post was last modified: 08-03-2019, 06:02 AM by Chriz.)
Post: #28
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
There is an extra RF Adapter to test the Frequency, and the RF Test Adapter can run without ACDP Program, App... Yes is sold separately
Try to renew key over soldering points and P8P Adapter, go to Key Renew Menu and press Help button, there you can see the soldering points. -------------------------- just found this information, a new update is released Yanhua Mini ACDP renew the EEPROM data of CAS1 - CAS4. CAS1 (0K50E) CAS2 (2k79x) CAS3 (0L01Y/0L15Y/0M23S) CAS4 (1L15Y / 5M48H /1N35H) refresh & coding by ICP. Function Renew the EEPROM data of CAS1-CAS4. New EEPROM data can be generated by loading EEPROM data of other cars, modifying vehicle frequency, VIN, ISN code and other info, to solve the problem of replacement a CAS module because of missing EEPROM data of CAS module or failed reading EEPROM data of CAS module. |
|||
28-03-2019, 19:45 PM,
Post: #29
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
I tried the renew on a cas2 but it is not working. Checked with isn tool
Today made a cas4 spare key. SUCCESS! CAR STARTS. strangely it asked me notto write back eeprom! I found that interesting. Only problem is remote lock unlock not working. Used a virgined original key. No sure if that may be an issue. Will test more |
|||
29-03-2019, 08:25 AM,
Post: #30
|
|||
|
|||
RE: Yanhua mini ACDP programming tool
Seems to be normal that you don’t need to write back eeprom. Friend with autohex confirmed that.
But I have the same issue car starts but locking/unlocking does not work. Though it was Problem from China key, but seems to be ACDP problem. Reading ISN from MSD85 works fine without opening ecu, but write isn you need tricore pass and opening ecu. But with no tool that reads password this function is useless, hope they add a function to get password over ACDP. When I can’t write isn to dme I will try to renew cas and write isn from dme in cas, hope that will work i will Test these days and Report |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content