Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help for vo file
22-03-2019, 18:01 PM,
Post: #1
|
|||
|
|||
Help for vo file
Ista can’t access my car and identifying it but only asking to import vo file to enable reading the car
And other software such as inpa gives error ifh 0009 ecu is not response The problem mentioned above happened after I was connecting to car and programming frm3 And lost connection during the operation . So now I don’t know what to do ! The car is running but heavy steering all warning lights on And auxiliary cooling fan is at highest speed If one is able to do this job I would appreciated financly though Vin : L503037 |
|||
22-03-2019, 18:06 PM,
(This post was last modified: 22-03-2019, 18:13 PM by Matthew53.)
Post: #2
|
|||
|
|||
RE: Help for vo file
Why did you want to program FRM3 and which interface did you use? You need to programm frm3 by winkfp in expert mode, then transfer VO from CAS to FRM and process car coding.
Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
22-03-2019, 19:25 PM,
Post: #3
|
|||
|
|||
RE: Help for vo file
It was my fault to program frm with ista
I replaced frm that’s why I needed to program it The interface I used is icom next vxdiag scanner No able to connect to ecu at all with any scanner now |
|||
22-03-2019, 20:20 PM,
Post: #4
|
|||
|
|||
RE: Help for vo file
You need to fix the frm for the start. Vo file won't help you at this point.
|
|||
22-03-2019, 21:09 PM,
(This post was last modified: 22-03-2019, 21:10 PM by Matthew53.)
Post: #5
|
|||
|
|||
RE: Help for vo file
(22-03-2019, 19:25 PM)mohd.moneef Wrote: It was my fault to program frm with ista Find someone who has original icom and try to flash correct zusb by winkfp expert mode. If it's not gonna work, then you'll can try to read eeprom&flash by programmer (e.g VVDI) and write correct dump according to your mcu mask. Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
22-03-2019, 21:11 PM,
(This post was last modified: 22-03-2019, 21:24 PM by ____ANGEL___.)
Post: #6
|
|||
|
|||
RE: Help for vo file
(22-03-2019, 19:25 PM)mohd.moneef Wrote: It was my fault to program frm with ista do you have a power supply connected to car? i can try help you now with anydesk, send id in pvt. For free obviously |
|||
24-03-2019, 19:06 PM,
Post: #7
|
|||
|
|||
RE: Help for vo file
Thank you people for your prompt replys
Here what I’ve done so far I brought original Icom and get same massage ifh 0009 ecu is not response with all tools and softwares What I notice that the terminal 15=0 which is strange ! My car obd socket pin1 is not wired by the way . So Now do I have issue with terminals or get dead cas !!?? No gateway no access to car at all !!! I think your right ! Because we can’t access the car and identify at all with any scanner but I’m wondering that we don’t have who works on vvdi and any other programmer and it costs maybe more than having new parts ! (22-03-2019, 21:09 PM)Matthew53 Wrote:(22-03-2019, 19:25 PM)mohd.moneef Wrote: It was my fault to program frm with ista (22-03-2019, 21:11 PM)____ANGEL___ Wrote:(22-03-2019, 19:25 PM)mohd.moneef Wrote: It was my fault to program frm with ista |
|||
24-03-2019, 19:26 PM,
Post: #8
|
|||
|
|||
RE: Help for vo file
(24-03-2019, 19:06 PM)mohd.moneef Wrote: Thank you people for your prompt replys 1pin is +12V from Ignition, so it must be wired. In Ista-D, you can skip checking KL15 by changing interface connection in ISTA settings from 'local' on 'direct', then take your Icom IP and put when you process complete identification, maybe you'll find some relevant faults. The best to check CAS is bench setup. If it's about works on programmer, it will be definitely much cheaper than new parts, just need to find someone around who has that. Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
24-03-2019, 19:33 PM,
Post: #9
|
|||
|
|||
RE: Help for vo file
Pin 1 is not wired can you check the attachment !
(24-03-2019, 19:26 PM)Matthew53 Wrote:(24-03-2019, 19:06 PM)mohd.moneef Wrote: Thank you people for your prompt replys |
|||
24-03-2019, 19:37 PM,
Post: #10
|
|||
|
|||
RE: Help for vo file
you have to bring +12 on the KL15 line. (as indicated in ista p, in these cases)
once the kl15 line is restored, you can read the car again, .. and fix the CAS, if in the FRM a valid FA is not written, .. before intervening with ista p, better to write FA on FRM. BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Frm3 ipo file | hero3838 | 6 | 171 |
Yesterday, 09:52 AM Last Post: Vadim AA |
|
Requests the ISTAGUI.exe.config file. | kirby | 3 | 223 |
01-05-2024, 10:31 AM Last Post: GoNz0- |
|
Source for DAMOS/A2L file | skouk | 0 | 86 |
24-04-2024, 08:55 AM Last Post: skouk |
|
SSD file request as I'm hopeless. | GoNz0- | 4 | 236 |
20-04-2024, 07:25 AM Last Post: GoNz0- |
|
ISTA File Missing? | Homersbud | 5 | 318 |
13-04-2024, 23:53 PM Last Post: rocdeng |
|
MINI R60 .SSD-File COAPI-1000 | bmw335coding | 0 | 64 |
11-04-2024, 14:56 PM Last Post: bmw335coding |
|
Need NBT EVO ID6 eMMC File | Emmy | 2 | 314 |
10-04-2024, 21:50 PM Last Post: Mwahab |
|
BMW ISTA-P Rheingold 69.0.200 (Torrent File) | carsoftcare | 1 | 263 |
26-03-2024, 12:09 PM Last Post: hlip |
|
REQUEST ista 4.45.21 the ISTAGUI.exe file | ddsx | 5 | 419 |
24-03-2024, 14:15 PM Last Post: Mathijshee |
|
REQUEST ista 4.45.30 the ISTAGUI.exe file | luohongzhi | 1 | 229 |
05-03-2024, 15:09 PM Last Post: CATAHA |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content