Possibly Related Threads…

***kubixix*** · 21-04-2019, 10:11 AM,

(08-02-2019, 06:24 AM)Almaretto Wrote:
(08-02-2019, 06:03 AM)BimmerSLO Wrote: One question..... is it possible to also use this remote access for diagnostics with ISTA?

Yes

Hello, can you tell how to?
I can successfully connect with Esys but got problems with ISTA.
Direct connection with ipp from remote hamachi?

***kubixix*** · 22-04-2019, 08:55 AM,

I solved it by using connection through ediabas.
The thing is that ENET diagnostic port is 6801 and control port is 6811. For example if I want to use DE file reader it says that ignition is off. I think it’s because lack of connection on port 6811. If someone has solution for that? Ista is working fine, it doesn’t need controlport from what i saw.

***kmodel99*** · 24-04-2019, 07:22 AM,

(13-12-2018, 11:48 AM)bmwcoder75 Wrote: There you go, I compiled this document for you guys.

This is my own method. Many other VPN clients available, or can be done via home router too.
Especially useful when remote client does not have E-Sys or you do not want the remote client to see how you do.

I was able to compile this doc and make my own procedure thanks to some posters who helped out by pointing me to the right direction.

Thanks and Rep please then PM for password

PM (Private Message) for password, do NOT post in thread for it, it will be removed.

Thanks, Admin.

Please cleanup your Private MEssages.

***bmwcoder75*** · 24-04-2019, 08:17 AM,

New document updated with additional info and no more password
Enjoy

***mashi1228*** · (This post was last modified: 25-07-2019, 05:03 AM by mashi1228.)

very thanks.
good work

***mashi1228*** · (This post was last modified: 25-07-2019, 05:03 AM by mashi1228.)

(22-04-2019, 08:55 AM)kubixix Wrote: I solved it by using connection through ediabas.
The thing is that ENET diagnostic port is 6801 and control port is 6811. For example if I want to use DE file reader it says that ignition is off. I think it’s because lack of connection on port 6811. If someone has solution for that? Ista is working fine, it doesn’t need controlport from what i saw.

thanks.

***emhtuning*** · 24-07-2019, 09:30 AM,

in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

***mashi1228*** · (This post was last modified: 25-07-2019, 05:02 AM by mashi1228.)

(24-07-2019, 09:30 AM)emhtuning Wrote: in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

oh thanks.

***mashi1228*** · 01-08-2019, 15:02 PM,

(24-07-2019, 09:30 AM)emhtuning Wrote: in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

I have a question. I try to firmware update kombi and nbt with vpn, so I fail due to dhcp problem. Is there any way? I'm using Team Viewer.
All other modules are being updated well.
thanks.

***bmwcoder75*** · 01-08-2019, 16:30 PM,

(01-08-2019, 15:02 PM)mashi1228 Wrote:
(24-07-2019, 09:30 AM)emhtuning Wrote: in order for ista+ to work remotely , easiest way is to your easyconnect to configure Ediabas as ENET and use the generated VPN IP address as Enet IP address . then change the interface settings in ISTA+ to "Ediabas.ini" , usually its first option in the list .

I use that everyday ( I use teamviewer VPN option since i have paid account ) , works perfectly fine .

I have a question. I try to firmware update kombi and nbt with vpn, so I fail due to dhcp problem. Is there any way? I'm using Team Viewer.
All other modules are being updated well.
thanks.

Copy the files locally and install esys. Do it this way

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	F30 Coding flash with fog lights	x3non507	0	9	44 minutes ago Last Post: x3non507
	Bmw f30 xdrive disable coding	hero3838	5	150	Yesterday, 10:54 AM Last Post: hero3838
	Secure coding in BMWs (unit list)	Node	88	15,400	01-06-2024, 02:05 AM Last Post: champuser-riven
	E39 Rain Light Sensor / Auto Headlight Retrofit Coding	bmw335coding	1	72	31-05-2024, 06:43 AM Last Post: Vojno
	Coding bmw f26 Adaptative LED (FRM) wellcome light angel eyes max bright	ruben_17non	5	428	28-05-2024, 23:07 PM Last Post: ruben_17non
	BMW Lane change assistant Coding	Zenel6GT	4	309	28-05-2024, 17:22 PM Last Post: Zenel6GT
	F25 Hud retrofit with EVO and 6WB kombi coding	simplextibi	0	66	26-05-2024, 15:54 PM Last Post: simplextibi
	coding drl taillight x3 g1 with esys	kwastmichiel	12	1,411	22-05-2024, 11:57 AM Last Post: Richard_1360
	BMW E71 EGS coding 8HP70 used	BS68	10	608	21-05-2024, 20:56 PM Last Post: Batje
	BMW G05. Coding(delete) Electric Tow Bar	TIGHTFIN	3	173	21-05-2024, 15:56 PM Last Post: kimz

Contact Us