Possibly Related Threads…

***Sedoy*** · 07-05-2019, 04:03 AM,

In the evening.

***Lux*** · 07-05-2019, 06:30 AM,

Great!!
Thanks again

***Sedoy*** · (This post was last modified: 07-05-2019, 15:45 PM by Sedoy.)

For testing v4.16.40

Edit: I'm testing it self, working, i can execute, but i not Flash MyCar(Warranty).

***Lux*** · 07-05-2019, 22:14 PM,

Hi Sedoy, I've tried it, but nothing... sad

Maybe it's due to mine ISTA+ v4.16.40, sometimes I had some errors so I will try to reinstall ISTA+ v4.15.12 it works better..

It's possible to have a 4.15 patch too?

Thanks

***Sedoy*** · 08-05-2019, 04:09 AM,

(07-05-2019, 22:14 PM)Lux Wrote: I've tried it, but nothing...

What you mean with that? You can not execute (Button grey), or after click execute is nothing?

Is Interface set to "Dealer organisation ICOM/ENET local area network"?

***Lux*** · 08-05-2019, 10:07 AM,

(08-05-2019, 04:09 AM)Sedoy Wrote:
(07-05-2019, 22:14 PM)Lux Wrote: I've tried it, but nothing...

What you mean with that? You can not execute (Button grey), or after click execute is nothing?

Is Interface set to "Dealer organisation ICOM/ENET local area network"?

I cannot execute (button grey) and then the voltage control don't works (KL 15: _ KL 30: _ ).

I repeat my ISTA+ 4.16.40 don't works very well... speechless

***Sedoy*** · (This post was last modified: 08-05-2019, 11:00 AM by Sedoy.)

Kl15 and Kl30 don't work with ENET.

Which Interface you set? Post Screenshots from calculated Plan. Please more info.

***Lux*** · 08-05-2019, 12:12 PM,

(08-05-2019, 10:59 AM)Sedoy Wrote: Kl15 and Kl30 don't work with ENET.

Which Interface you set? Post Screenshots from calculated Plan. Please more info.

ok, later I'll do some screenshots yes

I've tried this settings:

Dealer organisation ICOM / ENET local area and ISIS netw
Ethernet as preferred communication channel when connected via ICOM? => No

***Sedoy*** · 08-05-2019, 14:22 PM,

I tested with "Dealer organisation ICOM/ENET local area network". You can also test with "Dealer organisation ICOM/ENET direct connection".

***BMWS1000RR*** · 08-05-2019, 14:23 PM,

Can someone explain how to setup coding on just one device? Like in ISTA P you can hide all actions on coding for EWS, ABS so that only DME and KOMBI are coded. Can ISTA+ be setup to do coding on one unit like DME?

I have a problem that I have a virgin DME. I does not have VIN in it. When I look at it in ESYS there is no CAFD showing for that DME.

Then when I see it in ISTA+ I dont have the ABS module attached to the wiring harness and I dont have the RDC and GM with the correct VIN information in those. ISTA+ is complaining too much about replacing modules with various part numbers. I have tried to show them as replaced to get it past the issue, but seems ISTA+ knows the hardware has not changed and keeps asking to change it and will not just program the DME so I can be done with it. ISTA P was so easy to use the HIDE ALL ACTIONS on modules you dont want to program.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA issues on G05 X5	330d	6	121	1 hour ago Last Post: Stratofortress
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,769	703,099	3 hours ago Last Post: Sedoy
	ISTA 4.33.30 The programming system could not be initialised	Edward1968	40	8,486	Yesterday, 09:50 AM Last Post: iyade46
	ISTA 4.46.xx problems and possible solution	Sedoy	131	16,216	31-05-2024, 13:32 PM Last Post: CATAHA
	Update ISTA at once 4.43.40 (ISTA Update Program)	charlesjyw	42	8,819	30-05-2024, 19:52 PM Last Post: mars13
	ISTA+ 4.47.3x Install Files - MEGA	shawnsheridan	11	1,848	29-05-2024, 04:50 AM Last Post: ivanp
	Lowering g05 lci with ista	Zenel6GT	16	760	28-05-2024, 12:59 PM Last Post: NeRkO20
	ISTA 4.47 programming N/A	Neon10	7	485	28-05-2024, 07:46 AM Last Post: Thomas77
	ISTA 4.46.30 can't finish the diagnosis	spiridon	1	216	28-05-2024, 07:32 AM Last Post: flterence
	ISTA Czech Database ( 4.42.XX - 4.47.XX)	inspi1981	67	8,354	27-05-2024, 13:22 PM Last Post: inspi1981

Contact Us