Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Update DME MSS60 planted...
23-07-2019, 00:31 AM,
Post: #11
|
|||
|
|||
RE: Update DME MSS60 planted...
You need to use an ICOM. Will not work with k+DCAN.
|
|||
23-07-2019, 04:39 AM,
(This post was last modified: 23-07-2019, 04:42 AM by scorpium59.)
Post: #12
|
|||
|
|||
RE: Update DME MSS60 planted...
(23-07-2019, 00:31 AM)Kuiyt2 Wrote: You need to use an ICOM. Will not work with k+DCAN. Why would not it work with kdcan? (22-07-2019, 15:23 PM)bmwcoder75 Wrote: Publish picture of main sticker with ref numbers etc .:: Take your fingers out of the... and Rep +Thanks, it's not difficult ::.
VIN MAGIC PRO Beta Test Youtube FeatureCode Carplay Ilean Offline Licence SSD Creator Licence GenEsys Creator Licence |
|||
23-07-2019, 18:20 PM,
Post: #13
|
|||
|
|||
RE: Update DME MSS60 planted...
You can't flash that in k+dcan. Restore it with icom. It happens because k+dcan can't adapt his baudrate when flashing and finishing operations, now your DME is stuck in RSA signature failure, not bricked neither blocked, simple reflash that with icom and winkfp or nfs or ista whatever you prefer...
|
|||
23-07-2019, 20:33 PM,
Post: #14
|
|||
|
|||
RE: Update DME MSS60 planted...
(23-07-2019, 18:20 PM)____ANGEL___ Wrote: You can't flash that in k+dcan. Restore it with icom. It happens because k+dcan can't adapt his baudrate when flashing and finishing operations, now your DME is stuck in RSA signature failure, not bricked neither blocked, simple reflash that with icom and winkfp or nfs or ista whatever you prefer... this problem is specific to this dme with kdcan? Because I have never met this concern on mine in kdcan on edc .:: Take your fingers out of the... and Rep +Thanks, it's not difficult ::.
VIN MAGIC PRO Beta Test Youtube FeatureCode Carplay Ilean Offline Licence SSD Creator Licence GenEsys Creator Licence |
|||
23-07-2019, 20:42 PM,
Post: #15
|
|||
|
|||
RE: Update DME MSS60 planted...
Yes some dme are bastard!!! Also 8hp EGS in xdrive models only icom... some ecus only icom also DSC on some mini etc....
|
|||
Reputation: +1 - scorpium59 [+1] | |||
29-07-2019, 18:21 PM,
Post: #16
|
|||
|
|||
RE: Update DME MSS60 planted...
(23-07-2019, 20:33 PM)scorpium59 Wrote:(23-07-2019, 18:20 PM)____ANGEL___ Wrote: You can't flash that in k+dcan. Restore it with icom. It happens because k+dcan can't adapt his baudrate when flashing and finishing operations, now your DME is stuck in RSA signature failure, not bricked neither blocked, simple reflash that with icom and winkfp or nfs or ista whatever you prefer... You CAN flash the MSS60 with a DCAN cable but only particular ones. I have used the one from Bimmergeeks.com called "Pro Cable" to flash the MSS60 many times, with perfect results. You can read about the differences in their cable on their web site or email them about it. If you were unlucky, you've permanently bricked your DME. But with a little luck, you are stuck as _ANGEL_ has described. You can recover with an ICOM or a Pro Cable. |
|||
Reputation: +1 - scorpium59 [+1] | |||
30-07-2019, 12:43 PM,
Post: #17
|
|||
|
|||
RE: Update DME MSS60 planted...
(23-07-2019, 20:33 PM)scorpium59 Wrote:(23-07-2019, 18:20 PM)____ANGEL___ Wrote: You can't flash that in k+dcan. Restore it with icom. It happens because k+dcan can't adapt his baudrate when flashing and finishing operations, now your DME is stuck in RSA signature failure, not bricked neither blocked, simple reflash that with icom and winkfp or nfs or ista whatever you prefer... you can try disable fast-baudrate in winkfp configuration, if dont have icom avalible at the moment... |
|||
30-07-2019, 12:47 PM,
Post: #18
|
|||
|
|||
RE: Update DME MSS60 planted...
Yes, I have had this issue before, some ECUs will program with DCAN cable, but some have bricked, WinKFP often will show signature error.
Icom should restore. WinKFP should still be able to detect the ECU even if ISTA-D shows it an unresponsive |
|||
30-07-2019, 14:29 PM,
(This post was last modified: 30-07-2019, 14:36 PM by Clusters.)
Post: #19
|
|||
|
|||
RE: Update DME MSS60 planted...
(30-07-2019, 12:43 PM)rs@chip Wrote:(23-07-2019, 20:33 PM)scorpium59 Wrote:(23-07-2019, 18:20 PM)____ANGEL___ Wrote: You can't flash that in k+dcan. Restore it with icom. It happens because k+dcan can't adapt his baudrate when flashing and finishing operations, now your DME is stuck in RSA signature failure, not bricked neither blocked, simple reflash that with icom and winkfp or nfs or ista whatever you prefer... Yes, the MSS60 is one of several that have problems with the original DCAN cables. Many are OK but MSS60 is not. the problem was first reported by Mike Benvo However, again, the Bimmergeeks.com cable was engineered to address this problem and works perfectly with the MSS60. |