[batochinac]

Hi to all!! Yesterday i updated SBSL and SBSR modules with WinKFP on my E60 525d from 2005 year, after that i coded both with NCSExpert and delete errors in INPA but errors come back and light on my dashboard are ON.
After few times trying do delete error codes, no success, errors come back. Then i try to roll back modules in factory software, with NCS but errors still get there... What can be wrong with that modules, and how i can resolve this problem? The error codes as follows readed in INPA:

SIM/SGM 1 Error stored:

            93AD       60

A1 SBSL 5 Error stored:
          
            984C         70
            9857         70
            986D         70
            9878         70
            982C         70

A2 SBSR 3 Error stored:

            98ED         70
            98F8          70
            98AC         70

     If someone can help please reply!! Thanks for attention.

[SweetBMW]

This is a star system. Why only flash sbsl and sbsr?

Flash Flash also SGMZ AND SGMS

[batochinac]

This is a star system. Why only flash sbsl and sbsr?

Flash Flash also  SGMZ AND SGMS

Thanks for reply, i flash and those two modules, after flashing i have error for restraint system for belt tensioners on both front seats, but after coding with NCS, and clear errors with INPA everything was ok... no back errors. But now problem is SBSL and SBSR... cant clear error codes!!!

---

And in SGM module i have error for system time fault, what that means?

---

SweetBMW, i will try again to flashing AirBag (Security System Modules) but please tell me which modules are connected whit air bag and restraint system. i upload photo of my vehicle identification...

[batochinac]

Problem solved, when “system_zeit” in EdiabasTool32 writen to “system_zeit starten”, with argument job “1” error code disappeared from all restraint and air bag modules!!! Cheers!!!