Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
SD C4 unable to connect after Xentry upgrade 07/2019
28-08-2019, 10:33 AM,
Post: #1
|
|||
|
|||
SD C4 unable to connect after Xentry upgrade 07/2019
Dear all,
Need your advise for my problem. my SD C4 unable to connect after xentry upgrade to 07/2019, before using ver 12/2018 was ok. The error msg as below: "Initialization of diagnosis multiplexer failed. Possible causes : the link between the diagnosis multiplexer and the diagnostic socket is interrupted. The link between diagnosis multiplexer and the diagnostic unit is interrupted. The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 21) is faulty". If it tested om the SDconnect toolkit, the connection is ok. the padlock shows active. But, if I use DAS/Xentry, the padlock status is no active/no connection. Thanks in advance for your help. |