[vwmodul]

Hello All,

I need a help for my BMW X4 G02 2018. I retrofitted the High beam assist in my car. I changed the steering stalk set for this retrofit.

My problem is the old stalk set was : when I turned up or down the left stalk then the stalk stayed in the position and the the direction indicator flashes normally.


The new stalk set is different, dont stay the stalk in the up or down position. the new stalk works like a button. With the new stalk has not a "long " flashing, only 1 time working.
 if I use the new stalk for a " short " position the 3x blinking is working.

Is anybody know what I must coding? The parts compatible with my car I bought it from other X4 G02 from ebay. 
So it must be only coding problem...

Thank you

Br

Mate

[koder88]

how code error to ista ?

[vwmodul]

how code error to ista ?

I have original ISTA and esys with launcher PRO.

Thank you

[tokarszczak]

Code szl version in bdc

[vwmodul]

Code szl version in bdc

Hi,

I tried, I found this:

SZL_TYPE_ ->locking changed to unlocked - not working

another : LIN_VARIANTE_SPARE_SZL ->nicht aktive , changed to aktive not working

3140-PFLinSZL_11 ->  szl,r,aic,4Band,fla changed to all variations but not working.

Could you write me what I must code exactly?

Thank you

[vwmodul]

Hi All, Only 1 error get:

" Steering column switch cluster (SZL) Wrong version "

The stalk was used from eBay, from same car. The partnumber is correct, compatible.

Can anybody how can I solve this error?

Thank you

   

[SweetBMW]

Code the car wirh new fa with hba

[vwmodul]

Code the car wirh new fa with hba

Oh, yes. I made the VO code first, and after change the Stalk. 

Understand, I trying this... Thank you.