[ross2018]

Assuming that you are talking about PT not open shell
1- same in old version you need to check ign status in xentry
2-did not encounter this problem ( vas5054 )
3-did a few cars in das and no problem ( vas5054 )
4-in pt you don't have xentry sim

Did you update addons?

[ALE009]

Is it possible to get Vediamo or DTS Monaco to work with pass thru device? I want to disable low windshield wiper fluid message on cluster...
Can someone please check

[ross2018]

Yes
Vediamo is working with vas5054.
Don't know about dts.

[ALE009]

Yes
Vediamo is working with vas5054.
Don't know about dts.

Do you maybe know is it possible to disable that kind of message on cluster in Vediamo? Or disable the sensor so i doesnt check is there fluid level?

[ross2018]

Try in the instrument cluster to see if you have that warning and disable it.

[ross2018]

New update in xentry pt and open shell the icon of xentry update service is gone and a new one is in start menu mercedes.

[Original]

The software from versions 2019.03 to 2019.07 was great.
However, the 2019.09 version of the software is problematic.
I installed all the methods suggested by Penosa.

1. It is very slow.

The 2019.09 version will take at least 30 minutes to start communicating with the vehicle.

The 2019.07 version will diagnose in 5 minutes.

2. I can't log in to scn.

Does anyone have the same symptoms as me?

I want to get help.

[ross2018]

09-19 is slower then 07-2019 but not that slow.
SCN is working ok on my cars.
So no i don't have those symptoms.

[wosanyn31]

XDOS 09.19 woking fine in windows 10, if only I could make wis and hht work

[mse2006]

hello freinds,
I have install Xentry xdos 3 2019 and was very good
but I still have this error in 9 2019 version
any one can help?

solved
the problem was in the windows version.