Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Flashing with Esys 3.33.0
05-10-2019, 23:59 PM,
(This post was last modified: 06-10-2019, 00:03 AM by Ibrahim24.)
Post: #1
|
|||
|
|||
Flashing with Esys 3.33.0
Hi all,
I've noticed something different from Esys 3.33. Some tabs are now pre checked while the most ones are gone. Is the flashing process still the same as in Esys 3.27.1 in Esys 3.33? For example: I'v recently flashed my EGS with Psdzdata 4.18.30 and now when I wanted to try on with 4.19.30 my check boxes are only: swDeploy and cdDeploy. I can't click on blFlash. Is this the normal behavior ? |
|||
06-10-2019, 01:08 AM,
Post: #2
|
|||
|
|||
RE: Flashing with Esys 3.33.0
(05-10-2019, 23:59 PM)Ibrahim24 Wrote: Hi all, I believe this is normal. The boxes which are greyed out means that those modules are already at the most recent updated status and don’t need updating. In your example only the swDeploy and cdDeploy need updating within the EGS |
|||
06-10-2019, 19:49 PM,
Post: #3
|
|||
|
|||
RE: Flashing with Esys 3.33.0
So I can assume everything what's in the flash guide, is still the same in 3.33!
|
|||
06-10-2019, 19:53 PM,
Post: #4
|
|||
|
|||
RE: Flashing with Esys 3.33.0
(05-10-2019, 23:59 PM)Ibrahim24 Wrote: Hi all,In the TAL calculation window you should see the bootloader of the EGS in black, that means it is the most recent according to your psdzdata and will not be updated. that's why you cannot select blflash in the tal execution for the EGS. If my post was helpful to you please give me a thanks and/or reputation
|
|||
12-10-2019, 10:30 AM,
Post: #5
|
|||
|
|||
RE: Flashing with Esys 3.33.0
Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ?
|
|||
12-10-2019, 11:00 AM,
Post: #6
|
|||
|
|||
RE: Flashing with Esys 3.33.0
(12-10-2019, 10:30 AM)radzisz97 Wrote: Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ? Hello. Where do you see the problem? For the FRR controller, there is a new swDeploy (software flash files), as well as a new cdDeploy (configuration files). The boot loader is up to date. So you can flash the swDeploy and the cdDeploy at the FRR on newer versions. The bootloader will not be updated. |
|||
12-10-2019, 11:15 AM,
Post: #7
|
|||
|
|||
RE: Flashing with Esys 3.33.0
(12-10-2019, 11:00 AM)Mr_R Wrote:(12-10-2019, 10:30 AM)radzisz97 Wrote: Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ? I want to flash this module |
|||
12-10-2019, 19:51 PM,
Post: #8
|
|||
|
|||
RE: Flashing with Esys 3.33.0
(12-10-2019, 11:15 AM)radzisz97 Wrote:(12-10-2019, 11:00 AM)Mr_R Wrote:(12-10-2019, 10:30 AM)radzisz97 Wrote: Hi, i have the same problem, i want to flash FRR, i know there is some way to do it, maybe someone can help me ? You will flash it Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content