Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA]
05-02-2022, 11:11 AM,
(This post was last modified: 05-02-2022, 12:03 PM by Kentener.)
Post: #551
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
I know about the issue with the 1ms, that has always been the case. But even with the 1ms I can not read a fault memory. Very strange...
I have installed an older version (4.27.30) on a notebook and it works without problems. I also noticed the following. When checking in on my F07, the software gets stuck right at the first point. It is displayed: SBGD: G_ZGW STATUS_VCM_GET_FA ERROR Vorgang kann nicht fortgesetzt werden! Bitte abbrechen und anderes Fahrzeug anschließen! Under "Funktionale Jobs" "Ident" and "FS Lesen" are working. And in ISTA no equipment is displayed. I guess that VCM/FA can not be read from the ZGW... BMW F07 535ix GT (09/16)
BMW E61 530xi touring (07/05) BMW E39 528i (10/97) BMW E36 323i touring (03/99) Suzuki GSX750S Katana (1985) |
|||
05-02-2022, 12:26 PM,
Post: #552
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
I'm use one with ediabaslib firmware patched without problem.
|
|||
05-02-2022, 12:34 PM,
Post: #553
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Ok, what firmware do you mean? Can you give me a tip on what I could specifically change in my software?
BMW F07 535ix GT (09/16)
BMW E61 530xi touring (07/05) BMW E39 528i (10/97) BMW E36 323i touring (03/99) Suzuki GSX750S Katana (1985) |
|||
05-02-2022, 12:45 PM,
(This post was last modified: 05-02-2022, 12:51 PM by Sedoy.)
Post: #554
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(05-02-2022, 12:34 PM)Kentener Wrote: Ok, what firmware do you mean? Can you give me a tip on what I could specifically change in my software? In attachment you find link to originalpage as FAQ and newest Firmware with support Clamp for F,G- models. |