Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Range rover airbag B1211
06-05-2022, 22:42 PM,
Post: #1
|
|||
|
|||
Range rover airbag B1211
Hello guys
Range rover sport 2015 Airbag module Autoliv dk62-14d374-ag After clear crash have fault code B1211:11 Driver Seatbelt Retractor Pretensioner Deployment Control Circuit Short to Ground Try change seatbelt,use airbag resistor 3.3 Ohm but no result Thanks in advance |
|||
07-05-2022, 04:41 AM,
Post: #2
|
|||
|
|||
RE: Range rover airbag B1211
Check with 2,2ohm ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks. Best regards. Dragon |
|||
Reputation: +1 - al70 [+1] | |||
09-05-2022, 07:17 AM,
Post: #3
|
|||
|
|||
RE: Range rover airbag B1211
(06-05-2022, 22:42 PM)Klodian Wrote: Hello guysuse 2.2 ohm resistance |
|||
11-05-2022, 13:05 PM,
Post: #4
|
|||
|
|||
RE: Range rover airbag B1211
(09-05-2022, 07:17 AM)fizan Wrote:I also tried the 2.2 ohm resistor but again the same(06-05-2022, 22:42 PM)Klodian Wrote: Hello guysuse 2.2 ohm Solved,a solder point above one of the capacitors in the airbag module was the cause for fault, after I cleaned,everything ok,no fault,no airbag light in instrument cluster |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content