Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help with coding new G80 laserlights
|
26-05-2022, 14:48 PM,
Post: #1
|
|||
|
|||
|
Help with coding new G80 laserlights
Hello all!
I have had a unlucky week and my right headlight on my G80 M3 has been damaged due to a rock/stone (light still works, but lens/glass is cracked). So I have bought a new replacement laserlight from BMW. Does anyone know which steps to perform to code this headlight to the car? I have never done this before but I was going to try the following: Step 1 - Review software CAFD version in E-Sys for left headlight Step 2 - Flash same CAFD to right headlight, so both are same software version Step 3 - Calculate test plan in ISTA and follow steps Anything else missing? PS: I have only ISTA and E-Sys but no flashing data (I will download flash data of course once I know CAFD version)... also I have no ICOM just ENET + battery charger. Any advice? Or shall I just take it to BMW and pay them to code it for me? Thank you! |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
26-05-2022, 15:17 PM,
Post: #2
|
|||
|
|||
|
RE: Help with coding new G80 laserlights
Use esys
Detect caf and code, if can’t flash it Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
|
|
|
26-05-2022, 15:49 PM,
Post: #3
|
|||
|
|||
|
RE: Help with coding new G80 laserlights
Use e-sys with coding. Them carbration with ista.
- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- FSC 1AA002 OEM for remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
|
|
26-05-2022, 16:27 PM,
Post: #4
|
|||
|
|||
|
RE: Help with coding new G80 laserlights
Let ISTA do it?
|
|||
|
|
|
26-05-2022, 17:03 PM,
Post: #5
|
|||
|
|||
RE: Help with coding new G80 laserlights
(26-05-2022, 15:17 PM)dasi Wrote: Use esys Thank you… that’s all just Esys CAF coding? No need to flash same CAFD as left headlight? (26-05-2022, 15:49 PM)laquangksxd Wrote: Use e-sys with coding. Them carbration with ista. Thanks that’s easier than I thought! (26-05-2022, 16:27 PM)GoNz0- Wrote: Let ISTA do it? I could but wasn’t sure if ISTA will try to flash too - I only used Esys for flashing as ISTA without ICOM can be unreliable? |
|||
|
|
|
26-05-2022, 18:00 PM,
Post: #6
|
|||
|
|||
|
RE: Help with coding new G80 laserlights
Coding not needed, when You use control unit from old headlight
|
|||
|
|
|
26-05-2022, 18:11 PM,
Post: #7
|
|||
|
|||
RE: Help with coding new G80 laserlights
(26-05-2022, 18:00 PM)inspi1981 Wrote: Coding not needed, when You use control unit from old headlight You mean flashing I believe Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
|
|
|
26-05-2022, 19:32 PM,
Post: #8
|
|||
|
|||
|
RE: Help with coding new G80 laserlights
|
|||
|
|
|
27-05-2022, 07:36 AM,
Post: #9
|
|||
|
|||
|
RE: Help with coding new G80 laserlights
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
