Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
B&O amplifier for F10 and F01
26-05-2022, 19:55 PM,
Post: #1
|
|||
|
|||
B&O amplifier for F10 and F01
Hi everyone!
May be some one have an expirience about difference in amplifiers LEAR for Bang&Olufson sound system in F10 and F01. I have got B&O for my F02, but amp was flooded a bit. I have found many offers of F10 amps. According to ETK, F10 is compotible with F06,F12,F13. F02 - with F07. F02 and F10 amps have different part numbers, but Wiring diagram is the same. Is there ane hardware difference, that might affect on sound? Urbi et Orbi
|
|||
26-05-2022, 20:44 PM,
Post: #2
|
|||
|
|||
RE: B&O amplifier for F10 and F01
Those definitely differ by software between F01 and F10 hence different part numbers. However there are some specific hardware variants which were used in both F01 and F10 series so those can (theoretically) be reflashed to different series.
For example F10 part # 6808523 has identical hardware as F01 # 6808524 and 6808525. Other F10 part # which have same hardware as used in F01: 9287247, 9304378, 9320140, 9351080. P.S. The part # provided here are not all the same hardware. There were multiple hardware revisions of these amps. |
|||
30-05-2022, 17:58 PM,
Post: #3
|
|||
|
|||
RE: B&O amplifier for F10 and F01
Thank you! I have bought that F10 amp, will try to clarify the difference.
Urbi et Orbi
|
|||
23-01-2023, 17:37 PM,
Post: #4
|
|||
|
|||
RE: B&O amplifier for F10 and F01
FYI: Amps for F10 and F01 have different part numbers, but same hwel, so it is completely identical.
Urbi et Orbi
|
|||
23-01-2023, 18:01 PM,
Post: #5
|
|||
|
|||
RE: B&O amplifier for F10 and F01
You can fit it without problem, i did retrofit on my F01 many years ago, and AMP was used from F10. No worries, all works fine
Bagum4uK
--------------------------------------------------------------------------------------------------------- Press Thanks and Reputation, if my post helped you. |
|||
23-01-2023, 22:15 PM,
Post: #6
|
|||
|
|||
RE: B&O amplifier for F10 and F01
if its only software difference change it using esys
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content