[donjuan020]

I installed the hdd removed from the used unit to another unit. I am reprogramming by cleaning with the V850. Esys is giving an error. When ibad_0000270b-006_022_016 is about to complete, the process gives an error. What is the solution for this? Thank you for your support.

TAL Stopped " code: result of the routine control service is not correct "

Unit is :  NBTevo

Unit Version:  NBTevo_O18184I
Unit HWEL:  00002fc2  -  NBTevo ECE 10 ID5 Rueko (no GPS, MOST, USB1, USB2, WLAN, OABR1, BT, FM, AM )
Unit HMI:  006_025_001
Unit I-level:  0718

btld_00001ffd_006_025_001 : NBTevo Bootloader

swfl_00002718_006_025_001 : NBTevo RR HMI 
swfl_00002719_006_025_001 : NBTevo BMW HMI 
swfl_00002720_006_025_001 : NBTevo HMI Common 
swfl_0000271c_006_025_001 : NBTevo TTS 
swfl_00002727_006_025_001 : NBTevo Speech Common 
swfl_00002723_006_025_001 : NBTevo Speech ECE 
swfl_00002722_006_025_001 : NBTevo Speech US 
swfl_0000271f_006_025_001 : NBTevo Gateway Table 
swfl_0000271a_006_025_001 : NBTevo Core Media Connectivity
swfl_0000271e_006_025_001 : NBTevo EQ 
unknown FF_ffffffff_255_255_255 : Unknown
hwel_00002fc2_001_004_001 : NBTevo ECE 10 ID5 Rueko (no GPS, MOST, USB1, USB2, WLAN, OABR1, BT, FM, AM )

[laquangksxd]

You cannot exchange hdd from nbt evo for each other. It won't work (each nbt evo hdd has its own password). You need to replace the new hdd. If you need help, pm me

[Rob@BU]

HDD isn’t setup properly