Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA]
08-07-2022, 07:07 AM,
Post: #971
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
I'm running 4.36 and have ICOM on LAN and internet via WiFi. No issues. Can do both.
|
|||
09-07-2022, 05:04 AM,
Post: #972
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(08-07-2022, 06:18 AM)NeRkO20 Wrote: I don´t know if this "topic" belongs in this thread, but I´ll try it. Since Icom is in DHCP mode, you get also default gateway, so the PC tries to resolve/access the internet through the Icom, Either manually set the Icom LAN (not setting DNS/gateway for the LAN), or configure the Icom to not use DHCP, then it will be in Automatic Private IP Addressing (169.254.x.x), probably this is the difference from previous version. |
|||
09-07-2022, 07:21 AM,
Post: #973
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
@petraki
I will check this, it is not so much important but sometimes you also need internet. Thank you .:: Thanks+Rep doesn´t kill anybody ::.
|
|||
09-07-2022, 19:35 PM,
Post: #974
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
hello everyone how can i download latest full version
thanks for all members
|
|||
09-07-2022, 19:41 PM,
Post: #975
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
|
|||
09-07-2022, 23:02 PM,
Post: #976
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Hi,
I'm getting the error: 'download failed Try again' and says 'when trying to retrieve secure tokens' This is when calculating measures plan and trying to to software update. Any idea how to resolve? Connecting by ENET and no issues when doing car test and reading faults. Only when trying calculate measure plan for software update. |
|||
10-07-2022, 02:05 AM,
Post: #977
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(09-07-2022, 23:02 PM)st1 Wrote: Hi, what model/car/year are you trying to flash? What psdzdata/i level are you using? New models, as per BMW release notes, requires Secure Tokens with AOS on line conection with BMW back end for ceratin new models. Perhaps this is your case...... |
|||
10-07-2022, 07:42 AM,
(This post was last modified: 10-07-2022, 07:44 AM by st1.)
Post: #978
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
2021 manufactured G82 xDrive so looks like this is the case then with AOS required.
Updating car with 22-07-521 and most of the ECUs have this version, just the VTG requiring signing by the looks of it. Dealer and online AOS only has 22-03-565 so can’t help me…. |
|||
14-07-2022, 18:46 PM,
Post: #979
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
hi, i have installed standard tools and ista standalone from this thread and so:
- inpa can not load my ECU (e46 m47N) - ista isnt recognizing my ecu (i have to enter VIN number manually, and 7 digits vin isn't working too). SPdaten updated with BMW Coder KDCAN cable port set to COM1 Inpa shows battery and ignition with black dot |
|||
15-07-2022, 07:00 AM,
Post: #980
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(14-07-2022, 18:46 PM)haxigi Wrote: hi, i have installed standard tools and ista standalone from this thread and so: Try to load the engine ECU by other model, like E87 they should have been delivered with same engine. .:: Thanks+Rep doesn´t kill anybody ::.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content