Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
09-07-2022, 16:49 PM,
Post: #1
|
|||
|
|||
Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
Hello,
Today I had a Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3, it should get an i-level update to 03-22-564 and an optimization. I first completed the i-level update, then I obtained a VR Read with Kess V2 clone 5.030, when writing the tuning it broke off immediately and a message came from the Kess V2 (the control unit is not supported by the protocol) my tuner said that the i-level is too new and not tuneable. what do you think? bmw should have taken precautions against bench read and obd write. from HW: 0000208A023B04 SW: 00003609631E01 SW Ver.: CVN: 17925AA0 PRG: 02 Parts: Engine: HW Ver.: SW Update: 00005527631E02 Attachment: DME-MEVD17.2.3______ on HW: 0000208A024505 SW: 000036099F0A01 SW Ver.: CVN: 6735B931 PRG: 03 Parts: Engine: HW Ver.: SW Update: 000055279F0A01 Attachment: DME-MEVD17.2.3______ |
|||
09-07-2022, 23:23 PM,
Post: #2
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
Why do you flash the istep to 03-22? Yes on later isteps especially LCI2 models from 2021-03 onwards they locked the DME. JCW models 306HP with istep over 2021 cannot be unlocked "yet" not sure if you have the same issue now since you updated the istep.
|
|||
Reputation: +1 - paui [+1] | |||
10-07-2022, 08:53 AM,
Post: #3
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
The owner wanted an update on his vehicle. I'll try again on the bench. But I don't think that will do anything either.
|
|||
10-07-2022, 21:21 PM,
Post: #4
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
|
|||
12-07-2022, 11:17 AM,
Post: #5
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
I updated many cars ( both BMW and MINI) to newest I-level and no problem with locked ECU's/
Maybe your tuning hardware provider dont have support yet ? |
|||
12-07-2022, 11:46 AM,
Post: #6
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
u cannot read on board flash?
|
|||
12-07-2022, 19:38 PM,
Post: #7
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
i have downloaded the Vr Read from the Vr Server with the latest i-level but i cannot write this. it ends in a bricked ecu and Kess V2 5.030 says "The control unit is not supported by the protocol". i must reflash with ista the DDE and release the transport mode. i try bench read on Friday.
|
|||
12-07-2022, 19:53 PM,
Post: #8
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
do you have Hexprog or similar so you can read the P-Flash and not the Vr-Flash
|
|||
13-07-2022, 07:50 AM,
Post: #9
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
I have not hexprog. I read this ecu on friday with ecu Bench Tool.
|
|||
15-07-2022, 16:21 PM,
Post: #10
|
|||
|
|||
RE: Mini Clubman F54 2017 1.5 Turbo 102PS MEVD17.2.3 not tunable?!
i try today with ecu bench tool and i cannot read this ECU, it is locked.
"Ecu found loading data Tricore TC1793 found Ecu software revision 3. This ECU is protected. There is NO access to this ECU." |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content