Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F30 used EME moudule ISN fix is there any way or tool can do that
25-08-2022, 13:13 PM,
Post: #11
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(25-08-2022, 07:17 AM)vagsoft Wrote:  
(25-08-2022, 06:29 AM)Tombo Wrote:  
(24-08-2022, 18:32 PM)vagsoft Wrote:  
(09-08-2022, 12:24 PM)iyade46 Wrote:  F30 used EME moudule ISN fix is there any way or tool can do that
thank you so much

I have changed EME in F30 successful.

What did you use for adjusting isn or at least reading data from?

You need read Tricore D-Flash with any tool.

do you have pinout or any explain how to get tricore connected
25-08-2022, 18:23 PM,
Post: #12
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(25-08-2022, 08:14 AM)mav Wrote:  
(25-08-2022, 07:17 AM)vagsoft Wrote:  You need read Tricore D-Flash with any tool.

Do you have pin connection on the board for read Tricore?

Of course, I scanned with X -ray the PCB to find points where I need to connect.
25-08-2022, 18:41 PM,
Post: #13
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(25-08-2022, 18:23 PM)vagsoft Wrote:  
(25-08-2022, 08:14 AM)mav Wrote:  
(25-08-2022, 07:17 AM)vagsoft Wrote:  You need read Tricore D-Flash with any tool.

Do you have pin connection on the board for read Tricore?

Of course, I scanned with X -ray the PCB to find points where I need to connect.

can you post it ?
28-08-2022, 08:40 AM,
Post: #14
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(25-08-2022, 18:23 PM)vagsoft Wrote:  
(25-08-2022, 08:14 AM)mav Wrote:  
(25-08-2022, 07:17 AM)vagsoft Wrote:  You need read Tricore D-Flash with any tool.

Do you have pin connection on the board for read Tricore?

Of course, I scanned with X -ray the PCB to find points where I need to connect.

can send the picture ? or the points or how to connect to it ?
29-08-2022, 17:39 PM,
Post: #15
RE: F30 used EME moudule ISN fix is there any way or tool can do that
ive only seen eme swop were the board holding the data was swopped over to a used eme
29-08-2022, 17:59 PM,
Post: #16
XZBMW  RE: F30 used EME moudule ISN fix is there any way or tool can do that
(29-08-2022, 17:39 PM)aspy39 Wrote:  ive only seen  eme swop were the board holding the data was swopped over to a used eme

I make this method too. This is the easyest way.


Vanos
Press Thanks and Reputation, if my post helped you. under
02-09-2022, 15:10 PM,
Post: #17
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(25-08-2022, 08:14 AM)mav Wrote:  
(25-08-2022, 07:17 AM)vagsoft Wrote:  You need read Tricore D-Flash with any tool.

Do you have pin connection on the board for read Tricore?
Yes, I have pin connection. But I don't want to disclose it public.
03-09-2022, 04:21 AM,
Post: #18
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(02-09-2022, 15:10 PM)vagsoft Wrote:  
(25-08-2022, 08:14 AM)mav Wrote:  
(25-08-2022, 07:17 AM)vagsoft Wrote:  You need read Tricore D-Flash with any tool.

Do you have pin connection on the board for read Tricore?
Yes, I have pin connection. But I don't want to disclose it public.

so tell them how much you want to sell the information or no need to show us Alleged championships
Reputation: 0 - Locker [+1] , LeonidLunin [-1]
[+] 2 users say Thank You to rana for this post
22-09-2022, 08:22 AM,
Post: #19
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(02-09-2022, 15:10 PM)vagsoft Wrote:  
(25-08-2022, 08:14 AM)mav Wrote:  
(25-08-2022, 07:17 AM)vagsoft Wrote:  You need read Tricore D-Flash with any tool.

Do you have pin connection on the board for read Tricore?
Yes, I have pin connection. But I don't want to disclose it public.
 
 It is Interesting to say the least, You would have taken the solution 
from the board, but  to give back to the board,  you answer...
  " I don't want to..."   
although Folks did excerpt time and effort to help U in your Quest.
I sure would like to have known how one proceeds.

Worth giving it a thought Mr. vagsoft !!!
29-12-2022, 18:40 PM,
Post: #20
RE: F30 used EME moudule ISN fix is there any way or tool can do that
(29-08-2022, 17:59 PM)vanos Wrote:  
(29-08-2022, 17:39 PM)aspy39 Wrote:  ive only seen  eme swop were the board holding the data was swopped over to a used eme

I make this method too. This is the easyest way.

This is the EME motherboard of a BMW I3

It is where it takes the data and the ISN code.
If I change this motherboard, to a second hand EME, will EME work?


Attached Files Thumbnail(s)
   


Possibly Related Threads…
Thread Author Replies Views Last Post
XSMini Tool for reading R56 LCI 2013 Cooper D Dde Carl-C 0 50 14-06-2024, 09:11 AM
Last Post: Carl-C
XZBMW SSD Creator Ncsexpert (New Tool) scorpium59 564 41,938 14-06-2024, 09:03 AM
Last Post: scorpium59
XZBMW SWFL Extractor Tool bogdantogo 17 4,189 11-06-2024, 10:45 AM
Last Post: windel
XZBMW Tool for bench read 8hp Garryq 10 2,036 03-06-2024, 20:05 PM
Last Post: Vladica
  CheckSum Tool v1.0 editor by Bahram Akhundov - Software are FREE foxportal 0 437 03-06-2024, 08:42 AM
Last Post: foxportal
  Engineering Tool mertdavid 4 1,063 01-06-2024, 17:57 PM
Last Post: Stratofortress
  GenEsys Creator (New Tool FA ESYS) scorpium59 419 31,673 22-05-2024, 06:43 AM
Last Post: alsamaraee
ZBentley Tool to use to cut leather dashboard for hud retrofit Fx82 3 350 19-05-2024, 15:29 PM
Last Post: Fx82
XZBMW Tool for EGS 8HP replacement? AlpinWeiss2k18 40 8,316 24-04-2024, 13:38 PM
Last Post: BigManLT
  TESTO tool with ICOM Rolzs 5 539 17-03-2024, 20:23 PM
Last Post: Vojno

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content