Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ D-can not working after using Enet
30-09-2022, 09:40 AM,
Post: #1
|
|||
|
|||
D-can not working after using Enet
Hi
I have ISTA 4.32.15 and i use it with D-can cable before but now i used it with Enet for my F-series.all working grate but i can not connect to my E90 using d-can cable. I did move switch on cable but this didn't help. Do i need to re-instal ISTA. I have check all settings and Ediabas configuration and its all set up for It. Any help will be appreciated Thank you |
|||
30-09-2022, 09:48 AM,
Post: #2
|
|||
|
|||
RE: D-can not working after using Enet
Double check Ediabas.ini file, use Ediabas Konfigurator. Check portnumber and latancy in device manager.
BMW: CODING, PROGRAMMING, FSC, Apple CarPlay etc
VAG: CODING, PROGRAMMING, CP, Apple CarPlay, etc MOST SERVICES ARE AVAIALBE REMOTELY. WhatsApp: +447838191805 https://wa.me/message/ETI4FKOAF3JLJ1 |
|||
30-09-2022, 09:51 AM,
Post: #3
|
|||
|
|||
RE: D-can not working after using Enet
check all obd ini files also, check obd ini file in c/windows
|
|||
30-09-2022, 09:57 AM,
Post: #4
|
|||
|
|||
RE: D-can not working after using Enet
You have to check the correct setting inside the ediabas.ini file located in your ISTA installation directory. Also you should have to check if the settings for your com port are still ok. Specially the waiting time had to be 1ms!
|
|||
Reputation: +1 - al70 [+1] | |||
30-09-2022, 10:00 AM,
Post: #5
|
|||
|
|||
RE: D-can not working after using Enet
All have bee checked and looks ok.
I my miss something. |
|||
30-09-2022, 10:02 AM,
(This post was last modified: 30-09-2022, 10:03 AM by Tizen99.)
Post: #6
|
|||
|
|||
RE: D-can not working after using Enet
Plaese check if the com port is the same in the ini file and the device manager. Are the drivers for the cable correctly installed?
Can you try Com9? I have read somewhere that it can be a problem with Com1 |
|||
30-09-2022, 10:05 AM,
Post: #7
|
|||
|
|||
RE: D-can not working after using Enet
(30-09-2022, 10:02 AM)Tizen99 Wrote: Plaese check if the com port is the same in the ini file and the device manager. Are the drivers for the cable correctly installed? only what i did it was connecting enet and setting this only in ista after i go back to K-decan it didn't work. on any of older cars, but enet is still working. |
|||
30-09-2022, 10:15 AM,
Post: #8
|
|||
|
|||
RE: D-can not working after using Enet
You did switch ISTA back to Ediabas and restarted it. Right?
|
|||
30-09-2022, 10:47 AM,
Post: #9
|
|||
|
|||
RE: D-can not working after using Enet
(30-09-2022, 10:15 AM)Node Wrote: You did switch ISTA back to Ediabas and restarted it. Right?Correct |
|||
30-09-2022, 11:07 AM,
Post: #10
|
|||
|
|||
RE: D-can not working after using Enet
Hm .. settings are looking ok. Did you have another d-can cable to test?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW N13 MEVD17.2.5 working hours reset | Adel75 | 2 | 40 |
2 hours ago Last Post: Adel75 |
|
Reset Working Hours MEVD17.2.6 E70 | EngineerX | 17 | 1,246 |
18-04-2024, 17:05 PM Last Post: SkeYT |
|
e90 central locking not working | ELMEPRO | 10 | 365 |
15-04-2024, 12:33 PM Last Post: ELMEPRO |
|
Screen Mirroring not working on EVO | painsage | 5 | 300 |
10-04-2024, 15:05 PM Last Post: painsage |
|
BMW Remote ENET | B O S S | 11 | 1,222 |
06-04-2024, 17:38 PM Last Post: Jalami |
|
N55 Working Hours | Mefiuu92 | 1 | 225 |
03-04-2024, 16:54 PM Last Post: SkeYT |
|
FEM Not working with ENET but works wtih DCAN | armenh7 | 2 | 282 |
01-04-2024, 20:21 PM Last Post: armenh7 |
|
F90 MSA Memory not working | bmw335coding | 10 | 691 |
13-03-2024, 17:49 PM Last Post: bmw335coding |
|
mevd17.2.8 working hours reset | Mosso33 | 2 | 231 |
03-02-2024, 14:20 PM Last Post: foxportal |
|
G30 LCI 3AG not working | snf11lci | 10 | 817 |
02-02-2024, 03:10 AM Last Post: Bagum4uk |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content