Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

[HELP] BMW Icom Online (remote) Connection
08-11-2022, 15:03 PM,
Post: #11
RE: [HELP] BMW Icom Online (remote) Connection
I've flashed successfully BDC of G30 a few times remotely via VPN. But unless you know that everything is stable, I wouldn't recommend it. I'm always glad when the btld is updated, if it stops after the btld, I could drive there to fix it, but otherwise it will be bricked.

ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10
Lenovo P14s
Quote this message in a reply
08-11-2022, 18:33 PM,
Post: #12
RE: [HELP] BMW Icom Online (remote) Connection
VPN solution is already working.
Remote ICOM can be found/locked by software (iToolsRadar, EasyConnect).
Tools,Esys, ISTA and ISTA/P are working fine.
Solution is based on LAN to LAN implematation.
No Routing, port mapping or any other network trick.
Remote ICOM/ENET works as been locally connected to your PC.
Can be used with 169.254.x.x or any other private Network.
ENET also working.
Have been tested for 2 years now specially for NAV patching programming.
Thats all for now.
Soon will be available for wider testing.
Regards to all.
Quote this message in a reply
[+] 1 user says Thank You to jirkon for this post
14-11-2022, 17:04 PM,
Post: #13
RE: [HELP] BMW Icom Online (remote) Connection
(08-11-2022, 18:33 PM)jirkon Wrote:  VPN solution is already working.
Remote ICOM can be found/locked by software (iToolsRadar, EasyConnect).
Tools,Esys, ISTA and ISTA/P are working fine.
Solution is based on LAN to LAN implematation.
No Routing, port mapping or any other network trick.
Remote ICOM/ENET works as been locally connected to your PC.
Can be used with 169.254.x.x or any other private Network.
ENET also working.
Have been tested for 2 years now specially for NAV patching programming.
Thats all for now.
Soon will be available for wider testing.
Regards to all.

when?

Coding. 
Programming. 
Diagnostics. 
DME ISN.
Chip Tuning. 
Smart Key. 
Modify mileage. 
Reset ISN 8HP. 
CarPlay. NBT EVO MGU patch. 
Repair for BMW cars...
Remotely mode also!
Quote this message in a reply
14-11-2022, 22:00 PM, (This post was last modified: 14-11-2022, 22:01 PM by kubaskl.)
Post: #14
RE: [HELP] BMW Icom Online (remote) Connection
(08-11-2022, 18:33 PM)jirkon Wrote:  VPN solution is already working.
Remote ICOM can be found/locked by software (iToolsRadar, EasyConnect).
Tools,Esys, ISTA and ISTA/P are working fine.
Solution is based on LAN to LAN implematation.
No Routing, port mapping or any other network trick.
Remote ICOM/ENET works as been locally connected to your PC.
Can be used with 169.254.x.x or any other private Network.
ENET also working.
Have been tested for 2 years now specially for NAV patching programming.
Thats all for now.
Soon will be available for wider testing.
Regards to all.

When, how to donate or buy? Thank you

(08-11-2022, 14:20 PM)Wibbles Wrote:  I have software that will allow you to see an ICOM remotely as if it were connected locally, Beta testing is underway, PM me to join, there is no charge or fee to join.

Flashing ECU's remotely is risky as Node and Matthew state but I have beta testers that have done this sucessfully even though we don't reccomend.

Yea I know, but it is great to hear that. Thanks for your kindness. I wrote you PM smile
Quote this message in a reply
15-11-2022, 11:03 AM,
Post: #15
RE: [HELP] BMW Icom Online (remote) Connection
(14-11-2022, 22:00 PM)kubaskl Wrote:  
(08-11-2022, 18:33 PM)jirkon Wrote:  VPN solution is already working.
Remote ICOM can be found/locked by software (iToolsRadar, EasyConnect).
Tools,Esys, ISTA and ISTA/P are working fine.
Solution is based on LAN to LAN implematation.
No Routing, port mapping or any other network trick.
Remote ICOM/ENET works as been locally connected to your PC.
Can be used with 169.254.x.x or any other private Network.
ENET also working.
Have been tested for 2 years now specially for NAV patching programming.
Thats all for now.
Soon will be available for wider testing.
Regards to all.

When, how to donate or buy? Thank you


(08-11-2022, 14:20 PM)Wibbles Wrote:  I have software that will allow you to see an ICOM remotely as if it were connected locally, Beta testing is underway, PM me to join, there is no charge or fee to join.

Flashing ECU's remotely is risky as Node and Matthew state but I have beta testers that have done this sucessfully even though we don't reccomend.

Yea I know, but it is great to hear that. Thanks for your kindness. I wrote you PM smile

I have replied to you.

Author of Car Connector - remote ICOM & ENET tool - Built in VPN for easy coding and remote diagnostics

Car Connector on YouTube

Closed Beta in progress - Open Beta starting Jan 2024.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW ICOM NEXT ORI All LED RED aloxo 4 150 57 minutes ago
Last Post: ivanp
  [RESTARTED] icom next clone repair (only single pcb) ____ANGEL___ 49 5,268 3 hours ago
Last Post: ferrum
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 207 44,806 25-05-2024, 20:09 PM
Last Post: Neon10
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 113 38,095 23-05-2024, 15:42 PM
Last Post: hashtagmaster
  ICOM resetting with 4.47 mcrussell 13 632 21-05-2024, 13:39 PM
Last Post: NeRkO20
  How to use ICOM with BMW VirtualGT1 qeen 0 123 09-05-2024, 18:55 PM
Last Post: qeen
  MGU Bench connection kimz 4 590 22-04-2024, 17:06 PM
Last Post: kimz
  Carplay loses connection marcospoffo 2 297 19-04-2024, 19:44 PM
Last Post: marcospoffo
XZBMW Poor wifi signal from new ICOM's bmchicago 3 385 12-04-2024, 18:55 PM
Last Post: Node
XZBMW BMW Remote ENET B O S S 11 1,411 06-04-2024, 17:38 PM
Last Post: Jalami

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content