Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW E60 530d engine swap
26-10-2022, 19:42 PM,
Post: #11
|
|||
|
|||
RE: BMW E60 530d engine swap
ISN is 3E EF .
|
|||
Reputation: +2 - ROD-BENDERS [+1] , al70 [+1] | |||
26-10-2022, 20:20 PM,
Post: #12
|
|||
|
|||
RE: BMW E60 530d engine swap
Much obliged evgenijj
|
|||
27-10-2022, 08:16 AM,
Post: #13
|
|||
|
|||
RE: BMW E60 530d engine swap
(23-10-2022, 17:27 PM) mkii Wrote:(23-10-2022, 17:16 PM)al70 Wrote: cheers guys, if i cant find it i'll post the eeprom dump,this is the emulator he purchased, has anyone any experience with it ? cheers Hi MK2, have you been able to run the software, I have tried on win10 64bit + win7 32 bit but I keep getting this error, what version of Windows are you using ? Cheers. |
|||
27-10-2022, 09:34 AM,
Post: #14
|
|||
|
|||
RE: BMW E60 530d engine swap
I get the same error with mk2s software
|
|||
27-10-2022, 10:36 AM,
Post: #15
|
|||
|
|||
RE: BMW E60 530d engine swap
(27-10-2022, 09:34 AM)al70 Wrote: I get the same error with mk2s software it runs ok here but you will need a kline cable as it does not work with dumps. here All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
27-10-2022, 13:19 PM,
(This post was last modified: 27-10-2022, 14:09 PM by al70.)
Post: #16
|
|||
|
|||
RE: BMW E60 530d engine swap
Thanks rod, so if i connect to ecu on the bench, the software will run ?
What version of windows are you using rod ? I contacted the seller of the emulator about the error and they said it's just the drivers for the k+dcan cable are not installed, but they are, I can communicate with the ECU with inpa, strange I can't get it to run on both ECUs |
|||
27-10-2022, 14:57 PM,
Post: #17
|
|||
|
|||
RE: BMW E60 530d engine swap
On my win 7x 64 laptop the soft runs fine with or without a cable
All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
27-10-2022, 15:12 PM,
Post: #18
|
|||
|
|||
RE: BMW E60 530d engine swap
|
|||
27-10-2022, 18:17 PM,
Post: #19
|
|||
|
|||
RE: BMW E60 530d engine swap
ok. iv'e got this sorted, i just need to verify if pin 10 is ews line on bmw edc16c35, cheers to all for the help
|
|||
17-11-2022, 11:28 AM,
Post: #20
|
|||
|
|||
RE: BMW E60 530d engine swap
Guys I'm having a little trouble with this emulator, I can't finish the procedure, I've tried it in the car without the complete procedure but it is a non starter, with fault code 4A63 ews tampering, so no. 1 I wrote the ISN and now reads correct , no.2 set emulator for alignment, ok, next set ECU for new start value, I get no response, where am I going wrong ? Cheers.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content