[MrEdgar]

5BDK2S3IvcwPS5ABphhliCqeTQ4ioo88ikZYYA==-0520B6773863257E

Code:

qPpSbY6B5kO0uz7JR4/bnaaVgaRyX4KQrOMKMJkwLjOahsDuxocntt00g5RaS8QkPxA8wgpdzrS
P+Yes87b+HtXwpQ3UOf5QJiFucoql1d+NSqjh0NDU9ORQUrhuWSPXs+6SWuTNt6YRo4I0wQRsZP
ClqgraQwuVv0wnT+3Pg/95vovx0Cp7wihfvNFIW1BuHCfEbKEsmlOyYAroT8yeysEiYa/c53i48
uaTaB1fshhVfXxpCtaMMkvNgxyACMOeVbmU1aTYw+JeKNqXben8G8TE3jq1/XZjiFUNeG9RT2ie
vt374GqBSrqYrUzqHTcrY/bzFeeZDYGErDNkbN7+0A==

[cicciot]

yIKkFcVhp+Nj+i4H8gWiP0qeGFpqC5iJ7qM52g==-2007E28B9A74

Thanks in advance

[57Tuning]

VGdAQA0iSntbjd77Vgr5s/q9tjc2vMIF7kNVCJLRSOM=-0025_38AA_01D9_1587.

thanks

[MrEdgar]

yIKkFcVhp+Nj+i4H8gWiP0qeGFpqC5iJ7qM52g==-2007E28B9A74

Code:

DCIQE+Qy0atM/0IMfGNI2YQv+bY5c+nzsxFeDairEvkVW2K6jKihN/yTAbFq/1MdIKBflQ291JG
/BFZxc6tkm+AIi6yvBpu4Pf/xHXsIjbylYTBJpl4ZswXsa9l488ZI6PB7U/YeYSV5XkzEGKUcfs
QimvsYAZEbzYS6ROXs2KJ+/O1TxFIQA0aFN/NZn+7eSk0AHezjhLf/skuVMzNhz2D4owTwUt2dA
TGUYt2E1ZIafdtGJB7iHOJCfpi+UaQfRcylG5mM5wlcf4KPnf45KhyzqYfgH67qWtcmy63dQOOU
4LmwN2r5aI8pQTnyRCb3IR3anyIsc2HcbLnVU7vN+w==

VGdAQA0iSntbjd77Vgr5s/q9tjc2vMIF7kNVCJLRSOM=-0025_38AA_01D9_1587.

Code:

tg6EwbGp5+333F86KekiehBCpvvAUKpQBerWROJzFH3ZY4vHxgObGGiJu6uKdTzt/JlsxAE4apu
24yeVYhT/CGCn4CVC+fERbjM3yr4j7n599mCm8YooNrCW4FX36zGb2dvvL8QljkbCV/TAc107fN
Ztkh2ZLfgFPjgsCzJ0X0yKze2yNZWZ4hIjuPqvu2AkfukF6AArDIMe+yO9U9enpVt5WHr5kSl3W
BC3P9rNkCxS0RJonGSznofMWDmLj3q5b1LSV2rxYS5DminZ9lvZMzTdD6DlTP2nuJvbkAz6ddqM
PDPGc+fq1DQdW3LqmRCg8taOX5EOQwnnsU2soOydQg==

[steamship]

A question about the activation code before I install it.

I have my laptop set up with a dual boot from two separate partitions on the same HDD. One is my primary one that I use and the other I use for testing purposes i.e. installing s/w to see if it works properly, and if it does I install it on the main partition (and remove it from the test partition to free up space). If I install it on the test partition and get the activation code after requesting it here with my HWID, will I get the same HWID if I install it on the main partition?

A similar question on the lines of physical hardware changes. If at some point in the future I install an additional HDD, will this require a new activation code on the already installed version of PETKA? Just don't want to have to keep requesting a new activation code.

[Mex165]

FNxgtqEUCs7noAPUkhtbPQ==-WD-WCAWZ1391085

Thank you

[Tizen99]

A question about the activation code before I install it.

I have my laptop set up with a dual boot from two separate partitions on the same HDD. One is my primary one that I use and the other I use for testing purposes i.e. installing s/w to see if it works properly, and if it does I install it on the main partition (and remove it from the test partition to free up space). If I install it on the test partition and get the activation code after requesting it here with my HWID, will I get the same HWID if I install it on the main partition?

A similar question on the lines of physical hardware changes. If at some point in the future I install an additional HDD, will this require a new activation code on the already installed version of PETKA? Just don't want to have to keep requesting a new activation code.

Regarding your first question, yes you will need a new activation code on the main partition, because every Windows installation has it's own ID.

If you install an additional HDD it should work without a new activation code, for me it worked on my PC.

[steamship]

A question about the activation code before I install it.

I have my laptop set up with a dual boot from two separate partitions on the same HDD. One is my primary one that I use and the other I use for testing purposes i.e. installing s/w to see if it works properly, and if it does I install it on the main partition (and remove it from the test partition to free up space). If I install it on the test partition and get the activation code after requesting it here with my HWID, will I get the same HWID if I install it on the main partition?

A similar question on the lines of physical hardware changes. If at some point in the future I install an additional HDD, will this require a new activation code on the already installed version of PETKA? Just don't want to have to keep requesting a new activation code.

Regarding your first question, yes you will need a new activation code on the main partition, because every Windows installation has it's own ID.

If you install an additional HDD it should work without a new activation code, for me it worked on my PC.

Brilliant. Don't know why, but for some reason I had it in my head that the HWID generated was based on a number of components withing the computer. That being the case, I should be okay when/if I add an additional HDD at some point (will be used as storage, not for O/S).

[MrEdgar]

FNxgtqEUCs7noAPUkhtbPQ==-WD-WCAWZ1391085

Code:

n8rVQiDb+4eqiNx2/9lQKN/3sH6uzEwVDqNNP3VO1uS/r/FpKWYxFP8hbA1Ex7KBRHGYcFb6Jez
Tm/2Q+1LbeHd3yf3DQnT3K0DNBWcnnBkwjcQAcIXzta8B73z/zX7ALxDuqLkxZQRZbubL9O98Ao
EmVF39BA/cnxVFhRcksoJvUm0Pvtma+ppwcSYL7Ycal9Z5LBlj5qG2pijqGJOlXGbKiZK0T7mvi
6qiU0HGzQupsClTQcZMcQbe8D1yh8iRKxfDtJeiLFOAyBEtUuUkXzfVHektybPSo5zchtROeFey
ccUzzxRu7XLuTckuwx0qIB83qKpaq7fyBKnyHHO8ow==

[ciamardo]

Hi

jPvKCQUXdr8XBbXH2plhZUIKw7V+LaVy1qt2Sw==-E823_8FA6_BF53_0001_001B_448B_46FC_6861.