[acmw2019]

Hey guys , I am working with an Autel IM508 and XP400 , I tried to make a New Key VIA OBD II and of course it failed , the car was inoperative , I then hooked up the APC101 to the cas and was able to make a new key VIA dump and the car turned on but all dash lights were on . I then hooked up my autel maxisys elite to code/program all modules and once that finished the same issue, car was inoperative. Now when I try to do the Key Dump again and the epromm will read and write , the flash will read , but will not write, it gets to 5% and says flash fail . I have attached my files here . I will compensate whom ever can help me via paypal. Thank you!
Cas part number : 61.359147222
Ic number : 0L15Y
5WK49514XBR

[raffy haddad]

Why not try to write with another tool , vvdi prog maybe .......
Regards

[acmw2019]

Why not try to write with another tool , vvdi prog maybe .......
Regards

I am in Nicaragua and dont have ccess to any other tools in this country . I have tried to write a new flsh and i always get an error "failed to write flash" when i read my flash that it hs currently it is all FFFFFFFFFFFF , why wont my im508 be able to write a new flash ? It can red eeprom and flash and write a new eeprom but not flash.

[johann74270]

you need to read isn in ECU motor

[16eddi67]

Hier you cas fixed............

BR EDDY