Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Error Calculating Tal In E-sys
24-08-2023, 09:48 AM,
Post: #31
|
|||
|
|||
RE: Error Calculating Tal In E-sys
Look in post 27
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
24-08-2023, 10:01 AM,
Post: #32
|
|||
|
|||
RE: Error Calculating Tal In E-sys
|
|||
24-08-2023, 10:52 AM,
Post: #33
|
|||
|
|||
RE: Error Calculating Tal In E-sys
(24-08-2023, 08:31 AM)Haug530d Wrote:(24-08-2023, 08:06 AM)Node Wrote: MX51 will NOT do the trick because it NEVER came with NBT from factory. In my experience you will learn exactly nothing by just using files made by others... P.S. I also realised why your SVT was that much broken - you used "HWIDs from actual" button on ESys 3.27 which breaks SVT too much... And you had to delete those two units because of that. |
|||
24-08-2023, 11:59 AM,
(This post was last modified: 24-08-2023, 12:10 PM by Haug530d.)
Post: #34
|
|||
|
|||
RE: Error Calculating Tal In E-sys
(24-08-2023, 10:52 AM)Node Wrote:(24-08-2023, 08:31 AM)Haug530d Wrote:(24-08-2023, 08:06 AM)Node Wrote: MX51 will NOT do the trick because it NEVER came with NBT from factory. Actually I'm using E-sys 3.30.1 cause in 3.27 the Instep were greyed out. And no I didn't use the Hwid from actual button. See the attached pics for the log from E-sys |
|||
24-08-2023, 12:45 PM,
(This post was last modified: 24-08-2023, 12:56 PM by Node.)
Post: #35
|
|||
|
|||
RE: Error Calculating Tal In E-sys
What you are saying makes NO SENSE. You use 3.30.1 yet the SVT file you sent yesterday is CLEARLY in 3.27 format (3.30 uses DIFFERENT properties NAMING)! You did not click that button, yet SVT file you sent yesterday is broken in EXACTLY the way that button does it...
Regarding faults you sure you connected ZBE properly and it's operational before flashing? |
|||
24-08-2023, 13:13 PM,
Post: #36
|
|||
|
|||
RE: Error Calculating Tal In E-sys
(24-08-2023, 12:45 PM)Node Wrote: What you are saying makes NO SENSE. You use 3.30.1 yet the SVT file you sent yesterday is CLEARLY in 3.27 format (3.30 uses DIFFERENT properties NAMING)! You did not click that button, yet SVT file you sent yesterday is broken in EXACTLY the way that button does it... I started using the 3.27 until I realized it was not working with the Psdzdata files I was using, maybe I mixed some files perhaps? I have the Nbt and Zbe up running on the bench yes. |
|||
24-08-2023, 13:23 PM,
Post: #37
|
|||
|
|||
RE: Error Calculating Tal In E-sys
And your ZBE is the SAME as written in SVT file??
|
|||
24-08-2023, 20:35 PM,
(This post was last modified: 24-08-2023, 20:43 PM by Haug530d.)
Post: #38
|
|||
|
|||
RE: Error Calculating Tal In E-sys
Aparently i Choose Read (VCM) what you meant i should read was READ (ECU)?
Cause then i read ECU i only get NBT ZBE and ZGW but still get error then i try to calculate SVT. I'm using Esys 3.33.4 now (24-08-2023, 13:23 PM)Node Wrote: And your ZBE is the SAME as written in SVT file?? ZBE3 isn't that the NBT Idrive wheel? It says BMW 6582 9350723-03 192263 10 Romania HW:03.02.00 SW:03.0A.01 Preh 90160-002/0013 A 5943942 Date \: 06.02.17 Here is the SVT_ist file created with E-Sys 3.33.4 and READ (ECU) instead of READ (VCM) |