[Haug530d]

I have retrofitted a NBT HU in my Pre-LCI F11 alongside with a 8SK ZGW, everything seems to work except for the rearview camera, is there some setting that's need to be coded? i have 3AG in the VO.

BTW,m it's the NBT and 8SK ZGW that is retrofitted, camera is factory fitted.

[Fx82]

What error do you get?
Did you check on schema if the pins are at the same location on the quadlock ?

[Powerlab]

Check wiring
It has to be 21 24 23 trsvc

[Haug530d]

Check wiring
It has to be 21 24 23 trsvc

Yes the pins are correct.

---

Could it be that the PDC button is not functioning afte ther retrofit of the NBT?

[zero9]

And which modules you coded with that fa?

[Haug530d]

And which modules you coded with that fa?

I tried to VO code NBT, TRSVC and Kombi

[zeronoo]

You forgot to code pdc

[Mwahab]

Keep changing gateway table till it get to work .. I suppose you are having black screen when you operate the camera, aren't you?
once you sort out which gatewaytable is good, check if all other options are correct .. if you have any further issues you will need to flash zgw to a more compatible flash.

Edit: You should do this only after you VO code all modules with 3AG, you can use original car FA with 3AG only.

[Bagum4uk]

1695826184[/url]']

1695825563[/url]']
Check wiring
It has to be 21 24 23 trsvc

Yes the pins are correct.

---

Could it be that the PDC button is not functioning afte ther retrofit of the NBT?

How I remembered many years ago, after I installed on my F01 NBT , I bought ZBE button adapter (because camera buttons, pdc) was not working after retrofit!

[zero9]

You forgot to code pdc

And acsm