Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VCDS AAS lowering suspension more then 30mm
16-10-2023, 15:04 PM,
Post: #11
|
|||
|
|||
RE: VCDS AAS lowering suspension more then 30mm
what is the HW number of original unit? you can modify eprom on any unit even on your original unit. it does not have "allroad" function active but you can change the levels on the other with no problem , i guess the problem is that you flashed different SW and the unit does not work ok.
inside is 24c16 and st10f269 if flash does not repair the unis i can share the reads from this but you will need to open the unit and use programmer to upload this No help for people not give a feedback
|
|||
17-10-2023, 07:16 AM,
Post: #12
|
|||
|
|||
RE: VCDS AAS lowering suspension more then 30mm
(16-10-2023, 15:04 PM)loki954 Wrote: what is the HW number of original unit? you can modify eprom on any unit even on your original unit. it does not have "allroad" function active but you can change the levels on the other with no problem , i guess the problem is that you flashed different SW and the unit does not work ok. I will take out the ECU on the weekend, now I need the car Thanks so far already. *edit I attatched a photo of my ECU |
|||
17-10-2023, 13:46 PM,
Post: #13
|
|||
|
|||
RE: VCDS AAS lowering suspension more then 30mm
I flashed the original SGO file, sadly I still cannot edit the EEPROM, same errors...
I found a SW HW A index ECU for 50€ I think I will wait until that arrives and try it there |
|||
17-10-2023, 15:12 PM,
Post: #14
|
|||
|
|||
RE: VCDS AAS lowering suspension more then 30mm
(16-10-2023, 15:04 PM)loki954 Wrote: what is the HW number of original unit? you can modify eprom on any unit even on your original unit. it does not have "allroad" function active but you can change the levels on the other with no problem , i guess the problem is that you flashed different SW and the unit does not work ok. Would it be possible for you to share the eeprom please? And do you know the Byte location of the offsets for comfort, allroad, lift and so on so i can modify them myself in the future and programm the eeprom again? Thank you |
|||
20-10-2023, 11:03 AM,
Post: #15
|
|||
|
|||
RE: VCDS AAS lowering suspension more then 30mm
Today i received the Allroad ECU. Same thing, cannot change values in VCP.
I would be very grateful if anyone could test it at their ECU, dump the EEPROM, modify the values, dump the EEPROM again to see what values are stored where... Or is there another option to somehow read the ECU? I also have access to ODIS-E *I've also attatched the EEPROM dump of the bought allroad ECU |