[benyclaudiu]

VCDS 23.11.0 + VIIPlusLoader 08.023.11.txt


Date of Release : 2023.11
Version : 23.11.0
System requirements : Windows 7,8,10
Interface language : English

Code:
How to install VCDS in the PC



a. Please download VCDS software from official website.

b. Turn off antivirus such as AVG, McAfee, etc.

c. Disable Windows Defender

d. Block vcds on the firewall (PC firewall is not turned off).



Installation Guide:



1. Install VCDS-Release-23.11.0-Installer.exe Step by Step.

2. After installation was successful, please do not run the vcds
software and delete the shortcuts for the computer desktop VCDS version.

3. Install program VIIPlusLoader 08.023.11 once downloaded which will create the shortcut (VIIPlusLoader) to your desktop.

4. Connect the cable to the USB port on the laptop/PC.

5. Run VIIPlusLoader by clicking on the desktop shortcut. Click on Start
VCDS from the Loader screen. When connected for the first time, the
cable firmware will get updated.

5. Close all vcds software, plug cable in your car, and again run
VIIPlusLoader, click on Start VCDS from the loader screen and you can
now proceed further.


Thanks + Rep

[greenhorn]

there is newer loader.... VIIPlusLoader-08.024.01
https://cartechnology.co.uk/showthread.php?tid=89117

[giannis20vt]

The VIIPlusLoader-08.024.01 exists in the rar file also.
Thanks benyclaudiu

[m_fife]

08.024.01 looks like it bricked my cable.... updated firmware to 100% then wheel just kept spinning.... Blue light was solid and green was flashing while updating. At 100% green light went out. Waited for over an hour. Rebooted VIILoader, the cable isn't found and has no blue lights. Computer makes a sound that a cable is connected but VIILoader cannot detect it. Any suggestions to reflash?

[audi666]

From 08.023.11 you cannot downgrade anymore without physically flashing the chip.

[benyclaudiu]

08.024.01 looks like it bricked my cable.... updated firmware to 100% then wheel just kept spinning.... Blue light was solid and green was flashing while updating. At 100% green light went out. Waited for over an hour. Rebooted VIILoader, the cable isn't found and has no blue lights. Computer makes a sound that a cable is connected but VIILoader cannot detect it. Any suggestions to reflash?

Uninstall vcds from the pc, install vcds 23.3.1, then plug in the vcds cable in the usb port and open the program and give a connection test, now install VIIPlusLoader-08.024.01, open it after installation and give More Details .. then start the loader and wait, it will download vcds 23.11.0 and install rewriting the software in the vcds interface, search on YouTube how to install vcds 23.11.0

[PelsonBMW]

annd thats it , vcds doesnt even open

[seal777]

Hi everyone
VII plus loader 08.024.03 Big thanks to MRBEN
https://mega.nz/file/8pwVmC7R#QHr9lBv0D1...rVJ3Zr6Hco

[abartels]

Hi everyone
VII plus loader 08.024.03 Big thanks to MRBEN
https://mega.nz/file/8pwVmC7R#QHr9lBv0D1...rVJ3Zr6Hco

Hi, does this work with VCDS version 23.11.0 or do I need other VCDS version?
Sorry for this noob question, I am new to the subject.

Regards,
Alex

[chillaaa]

Can I use it for my hex v2 china clone too?