Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F01 High beam assist failure
05-12-2023, 16:43 PM,
Post: #1
|
|||
|
|||
F01 High beam assist failure
Hi guys,
I've got an issue with HBA (5AC) on an 2008 F01. Car has kafas, no error on ista (all green). With light switch on auto, when i press HBA button, nothing happens: no light on dash, high beam does not turn on with low light. In ISTA, i can see button status changing ok. But if i code FRM, the HBA works (green light on dash, high beam auto on when on dark roads as expected) until ignition is turned off. Any ideas? HBA is original, FRM was replaced a long time ago (on dealer, hw is compatible). Car has F001-19-07-520 i-level. Thanks |
|||
06-12-2023, 09:48 AM,
Post: #2
|
|||
|
|||
RE: F01 High beam assist failure
Is this happened after nbt retrofit?
Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
06-12-2023, 12:33 PM,
Post: #3
|
|||
|
|||
RE: F01 High beam assist failure
|
|||
06-12-2023, 13:12 PM,
Post: #4
|
|||
|
|||
RE: F01 High beam assist failure
HBA also on in KAFAS?
FRM need C_HBA_CAM_POS_Z, C_HBA_ENA, FLA_VERBAUT If my post helped you hit the thanks and reputation button. Thank you.
|
|||
06-12-2023, 14:01 PM,
Post: #5
|
|||
|
|||
RE: F01 High beam assist failure
|
|||
07-12-2023, 12:59 PM,
Post: #6
|
|||
|
|||
RE: F01 High beam assist failure
So if it has KAFAS hba won't be an issue, if it fails most of the KAFAS features will join that failure. So my advice to check coding after that check FRM
Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
02-01-2024, 09:09 AM,
Post: #7
|
|||
|
|||
RE: F01 High beam assist failure
(05-12-2023, 16:43 PM)claw Wrote: Hi guys, The same issue on my F06, the only difference is that I don't have Kafas but I've installed the camera under the mirror. I've added the 5AC into the FA and coded the full car, the HBA is working perfectly when I code the FRM but is not working after the engine is restarted. No errors on ISTA all modules are green. Any idea on hit to get this sorted because atm is very annoying |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content