Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW ISTA-D Rheingold 3.44.30 + 3.44.40 + 3.44.50 (EN, DE, CN, RU)
28-08-2014, 23:42 PM,
Post: #31
|
|||
|
|||
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(23-08-2014, 17:19 PM)MakSmack Wrote: I got the program to work. It runs, provides me with the usage notes, seems to function properly. However, I have two problems and I'm not sure they are related to each other. I have a same problem, I can not get K+DCan connected. How did you get it connected? Please help. As you mention you deleted Chinese Language. I deleted Chinese and Russian. |
|||
29-08-2014, 05:10 AM,
Post: #32
|
|||
|
|||
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
In the setting you have to choose the EDIABAS ( for your D-CAN tool )
In OBD.ini you have to set the same com port as you choosed for your D-CAN tool Set the com port 9 in the Device Manager and the same in the OBD.ini from EDIABAS/BIN Try after this connecting the tool to the OBD II and then to the USB Start the BMW Rheingod software, then go to settings and choose "EDIABAS" And then go back and start diagnostic in your car If the setting will not remain and everytime it is change then you must change it in the Registry Good luck |
|||
29-08-2014, 10:05 AM,
Post: #33
|
|||
|
|||
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(29-08-2014, 05:10 AM)mattydr67 Wrote: In the setting you have to choose the EDIABAS ( for your D-CAN tool ) First of all, thank you mattydr67. In the VCI setting I chose Ediabas. Since I installed Ediabas 7.3 so I have 2 Ediabas folders: one in C:/EDIABAS and the other one under C:/Program Files/Rheingold/Ediabas/...but I only have 1 OBD.ini file under C:/EDIABAS/....and I edited as [OBD] Port=Com9 Hardware=USB in Device Manager I also set Port=Com9 Latency=1 I think the problem is here since I have 2 Ediabas.ini files 1) inside C:/EDIABAS folder Ediabas.ini file setting: Interface = STD:OBD 2) inside C:/Program Files/Rheingold/Ediabas/... Ediabas.ini file setting ################# ;# EDIABAS 7.3.0 # ;################# ;============================================================================= [Configuration] ;============================================================================= Interface = Remote Simulation = 0 EcuPath = C:\EDIABAS\ECU SimulationPath = C:\EDIABAS\SIM TracePath = C:\Windows\Temp TraceSize = 1024 ApiTrace = 0 IfhTrace = 0 ; IfhnTrace = 0 ; SystemTraceSys = 0 ; SystemTraceBip = 0 ; SystemTraceIfh = 0 ; SystemTraceNet = 0 ; BipDebugLevel = 0 ; BipErrorLevel = 0 UbattHandling = 0 IgnitionHandling = 0 ClampHandling = 0 RetryComm = 1 SystemResults = 1 TaskPriority = 0 ; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab ; LoadWin32 = 0 NetworkProtocol = TCP ; --- neu ab EDIABAS 7.2.0 --------------------------------------------------- ShowIcon = 0 LogLevel = 0 TraceBuffering = 0 TraceHistory = 0 TraceSync = 1 ; TraceWriter = <FilePathName> ;============================================================================= [TCP] ;============================================================================= RemoteHost = LMUC203404 Port = 6801 TimeoutConnect = 2000 TimeoutReceive = 2000 TimeoutFunction = 1000 ; TimeResponsePending = 5000 ; DisconnectOnApiEnd = 1 ; InitCmd0 = FE,04,00,03,01 ; InitCmd1 = FD,05,00,03,01 ;============================================================================= [XEthernet] ;============================================================================= RemoteHost = Autodetect HeaderFormat = 0 TesterAddress = F4,F5 ControlPort = 6811 DiagnosticPort = 6801 TimeoutConnect = 20000 ;============================================================================= [IfhProxy] ;============================================================================= Port = 6700 ;============================================================================= ; End Of File EDIABAS.ini ;=========================================================================== Please help!!! I appreciate every help. |
|||
29-08-2014, 10:44 AM,
Post: #34
|
|||
|
|||
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
|