Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
problem with flashing CHAMP2 module (the programming dependencies are not correct)
07-02-2024, 17:15 PM,
Post: #11
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
I made a mistake in HWEL hence my last message. Which ESys version are you using?
|
|||
07-02-2024, 17:41 PM,
Post: #12
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
I use esys 3.35.3 and 3.27.1, the same result with both. I don't use launchers.
|
|||
07-02-2024, 19:37 PM,
Post: #13
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
You choise wrong i level 0313 should to use 0712 or 1112. Now you flashed swfl_00000A2F which is not compatibel with this unit and how to remove it from unit I don`t know
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
08-02-2024, 15:51 PM,
Post: #14
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
|
|||
08-02-2024, 16:10 PM,
(This post was last modified: 08-02-2024, 16:11 PM by jaramillo.)
Post: #15
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
Have you tried to perform a complete flash? including btld? from scratch? of course with correct tal
|
|||
08-02-2024, 17:35 PM,
Post: #16
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
I wonder if running STEUERN_RESCUE_MODE job would reset the firmware list...
|
|||
08-02-2024, 20:54 PM,
(This post was last modified: 08-02-2024, 21:33 PM by azwgh.)
Post: #17
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
(08-02-2024, 16:10 PM)jaramillo Wrote: Have you tried to perform a complete flash? including btld? from scratch? of course with correct tal yes, several times... with 2_7_0 versions (original firmware) and 3_10_0 (latest available). (08-02-2024, 17:35 PM)Node Wrote: I wonder if running STEUERN_RESCUE_MODE job would reset the firmware list... Using tool32 with I'm getting ERROR_ECU_REQUEST_OUT_OF_RANGE champ2.prg: ERROR_ECU_REQUEST_OUT_OF_RANGE (like many other....) champ2r.prg: ERROR_ECU_UNKNOWN_NEGATIVE_RESPONSE |
|||
11-02-2024, 19:39 PM,
Post: #18
|
|||
|
|||
RE: problem with flashing CHAMP2 module (the programming dependencies are not correct)
I tried to use ISTA for programming, the result was the same. I managed to replace all SWFL and FLSL with UNKN by interrupting the flashing several times. Interrupting when BTLD was updating resulted with the removal of one UNKN, but when BTLD was programmed again one more UNKN appeared. After that when I tried to program it I got the same error.
Code: BTLD_000014e0_003_010_000 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW E90 blower motor problem | anakin | 3 | 38 |
53 minutes ago Last Post: CATAHA |
|
Bmw F48 X1 2017 change cluster problem | bmw44 | 1 | 37 |
3 hours ago Last Post: jaramillo |
|
G11 PRoblem TV Channel | budddyyy | 9 | 196 |
Yesterday, 08:13 AM Last Post: budddyyy |
|
F10 3.0d Engine from 258hp to 245hp Problem with ecu | budddyyy | 5 | 179 |
12-06-2024, 12:53 PM Last Post: DieStream |
|
BMW E90 airbag module replace | anakin | 7 | 199 |
08-06-2024, 18:50 PM Last Post: anakin |
|
BMW MGU21 Emmc Writing Problem (Request) | donjuan020 | 10 | 795 |
05-06-2024, 00:22 AM Last Post: donjuan020 |
|
2008 E61 kgm module | al70 | 1 | 69 |
04-06-2024, 11:11 AM Last Post: Stratofortress |
|
ISTA 4.33.30 The programming system could not be initialised | Edward1968 | 40 | 8,746 |
01-06-2024, 09:50 AM Last Post: iyade46 |
|
BMW e87 LCI hralights retrofit problem | XeoN | 1 | 71 |
31-05-2024, 14:40 PM Last Post: wrp_199 |
|
G82 Cannot Code Seat Module | MatthewLC | 15 | 490 |
30-05-2024, 21:36 PM Last Post: MatthewLC |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content