[atomantmk]

Nobody can write VIN with 18 characters, take the VO from LM and write to the CAS module.
Please explain us what for errors you have, during coding or some DTC?

[JaVlk]

Write this file!
VIN changed and checksum corrected...

Nobody can write VIN with 18 characters, take the VO from LM and write to the CAS module.
Please explain us what for errors you have, during coding or some DTC?

I need to change the vin of the car in the cas2 module from wbanj71000B46853U to wbanj71000cr11645U, when I changed only the vin and put the cas2 into the car, the expert did not load the cas2 bullet, the vin error after editing the eeprom, now I can see the vin but it is wbanj71000cr116455

[volavka]

i think VIN Checksum must be 0x00 

[JaVlk]

i think VIN Checksum must be 0x00 

and depending on which line to change the checksum

[volavka]

and depending on which line to change the checksum

Checksum always on next byte after VIN

[JaVlk]

thank you i will try

[zero9]

Write this file!
VIN changed and checksum corrected...

Nobody can write VIN with 18 characters, take the VO from LM and write to the CAS module.
Please explain us what for errors you have, during coding or some DTC?

I need to change the vin of the car in the cas2 module from wbanj71000B46853U to wbanj71000cr11645U, when I changed only the vin and put the cas2 into the car, the expert did not load the cas2 bullet, the vin error after editing the eeprom, now I can see the vin but it is wbanj71000cr116455

Stop doing what are you doing as you clearly dont understand differences between checksum in dump and checkdigit from ncs.

[vierchatura]

WBANJ71000CR11645 check digit 5 
your Dump is prepared good. 

Can check yourself use CAPS LETTERS

Also in NCS Expert mark calculate checksum on this VIN

[JaVlk]

Write this file!
VIN changed and checksum corrected...

Nobody can write VIN with 18 characters, take the VO from LM and write to the CAS module.
Please explain us what for errors you have, during coding or some DTC?

I need to change the vin of the car in the cas2 module from wbanj71000B46853U to wbanj71000cr11645U, when I changed only the vin and put the cas2 into the car, the expert did not load the cas2 bullet, the vin error after editing the eeprom, now I can see the vin but it is wbanj71000cr116455

Stop doing what are you doing as you clearly dont understand differences between checksum in dump and checkdigit from ncs.

if I don't know what I'm doing, explain to me why I now have two different checksums, one u and the other 5

---

WBANJ71000CR11645 check digit 5 
your Dump is prepared good. 

Can check yourself use CAPS LETTERS

Also in NCS Expert mark calculate checksum on this VIN

I cannot have two different checksums on one WBANJ71000CR11645 check digit 5 and on the other WBANJ71000CR11645 check digit U

[user0086]

Can you make a screenshot of NCS in both situations?