[MasterMulder]

Hi everybody,

I need information on how to read/write this two ECUs, which tool can I buy for cheap? I have got a EOBD2 1250 tool but without software but maybe there's a better tool I can buy off internet, i wanted to do an EGR off on both of them. I have OPEL TECH2 that read ECUs but I do not think I can use this tool to read/write in this way the ECUs.

One from Corsa C 1.7 CDTI Isuzu Z17DTH Denso

Other one Corsa D 1.7 CDTI Isuzu Z17DTR Denso

Attached photo        

Thanks in advance, best regards

[Babos]

Hi best way buy PCMFlahser they can do that or buy MMC they can to.

[al70]

Or ktag clone is ok for these ECUs 
   

[MasterMulder]

Hi best way buy PCMFlahser they can do that or buy MMC they can to.

Thanks, so is this good?


https://it.aliexpress.com/item/100500628...ry_from%3A

---

Or ktag clone is ok for these ECUs 

Thanks,

this one?

https://it.aliexpress.com/item/100500599...ry_from%3A

I see ktag hasn't got the obd2 connector while Kess has it, that's the same?

EDIT: i checked on kess/ktag software the only ECU that can read is Z17DTR, not Z17DTH, is it the same for you? I downloaded a copy of kess/ktag and checked for available veichle.