[koziol]

is it posible to succesfuly delete  Adaptive Cruise Control ?
 there is no comunication at all with module 
8B-Adaptive Cruise 2 -- Status: Cannot be reached 0100
13-Auto Dist. Reg -- Status: Cannot be reached 0100
costumer wants to get rid of warning on dash .

[koziol]

no body can help or its impossible to do it?

[wawan.ru]

no body can help or its impossible to do it?

As far as I know, you can disable ACC and code normal GRA.

[koziol]

can someone help with that over tv

[spooky75]

You can try to:

1. code it out on gateway (19) and remove Auto Dist. Reg (13) and Adaptive Cruise 2 (8B) from list

2. on engine (01) change to CCS (standard cruise control)
Change Byte5, from "6E" to "2E"

3. on instrument cluster (17)
Change Byte4, from "BF" to "BB"

4. Clean all errors, cycle IgnOFF/IgnON

Test and provide back info.

[koziol]

Problem solved
I deleted acc from
engine module
Gateway module
  instruments cluster
  steering wheel module
On-board Camera
їшяgё Processing
light was still on than I disconect battery for more than 2 hr
after that no more light on dash

[spooky75]

Problem solved
I deleted acc from
engine module
Gateway module
  instruments cluster
  steering wheel module
On-board Camera
їшяgё Processing
light was still on than I disconect battery for more than 2 hr
after that no more light on dash

Nice at it's fїжed
Missed їшяgё processing, newer worked with car which have it.

Instead to disconnect battery and wait 2hours, you could also do "bus rest" by
1. Clean errors, cycle IgnOFF and wait 30sec
2. IgnON and clean errors again
3. cycle IgnOFF/IgnON one more time and then clean errors again.