Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
Xprog read FRM3 error
|
21-01-2026, 19:09 PM,
(This post was last modified: 21-01-2026, 19:10 PM by Jalami.)
Post: #1
|
|||
|
|||
|
Xprog read FRM3 error
I'm working on a repair for an FRM3, using Xprog 5.5 clone. At the beginning of the D/flash read, I always get this error... after 4 or 5 attempts I manage to read it, but it ends with the same error. Any ideas?
|
|||
|
|
21-01-2026, 19:25 PM,
Post: #2
|
|||
|
|||
|
RE: Xprog read FRM3 error
be careful, uninstall xprog and reinstall, and double check your connections, 5.5 is crap
|
|||
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
21-01-2026, 19:38 PM,
(This post was last modified: 21-01-2026, 19:39 PM by Jalami.)
Post: #3
|
|||
|
|||
|
RE: Xprog read FRM3 error
|
|||
|
|
|
21-01-2026, 19:49 PM,
Post: #4
|
|||
|
|||
|
RE: Xprog read FRM3 error
you're sure you're choosing the correct mcu ? can you read p flash ?
|
|||
|
|
|
21-01-2026, 20:02 PM,
(This post was last modified: 21-01-2026, 20:29 PM by Jalami.)
Post: #5
|
|||
|
|||
|
RE: Xprog read FRM3 error
|
|||
|
|
|
21-01-2026, 20:30 PM,
Post: #6
|
|||
|
|||
|
RE: Xprog read FRM3 error
xprog clone is not ideal for this mcu try reading something else, see if it will work with different chip
|
|||
| Reputation: +3 - gabivw [+1] , Jalami [+1] , sixcode [+1] | |||
|
|
|
22-01-2026, 08:03 AM,
Post: #7
|
|||
|
|||
|
RE: Xprog read FRM3 error
i use original xprog and never ever did have these errors and i did hundreds of these frms
so invest in good tools instead of clone junk Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
| Reputation: +2 - Jalami [+1] , al70 [+1] | |||
|
|
|
22-01-2026, 21:47 PM,
Post: #8
|
|||
|
|||
RE: Xprog read FRM3 error
(21-01-2026, 19:09 PM)Jalami Wrote: I'm working on a repair for an FRM3, using Xprog 5.5 clone. At the beginning of the D/flash read, I always get this error... after 4 or 5 attempts I manage to read it, but it ends with the same error. Any ideas? it's time to buy something like vvdi prog, I can sell mine because I have vvdi prog 2 by the way the vvdi prog read and write without problem, 4 wires and all ok |
|||
| Reputation: +1 - al70 [+1] | |||
|
|
|
22-01-2026, 21:58 PM,
(This post was last modified: 24-01-2026, 13:45 PM by bmwm3power.)
Post: #9
|
|||
|
|||
|
RE: Xprog read FRM3 error
Buy a "Orange 5 programmer" clone. I use it since 2 years without any problems on FRM3. Cheap and ёд5у to use.
|
|||
| Reputation: +1 - al70 [+1] | |||
|
|
|
22-01-2026, 22:27 PM,
Post: #10
|
|||
|
|||
|
RE: Xprog read FRM3 error
i also use vvdi prog, never any issue's, if the member above has a good deal for you, take it, you won't be disappointed
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
