[LdkE]

Hi all

coded the Alpina cluster in my 2021 G11 740dx usind this parameters in ё5у5ultra:

DKOMBI4
3000 Anzeige_Konfiguration
GLOBAL_LAYOUT_VARIANTE
Changed bmw_ag to alpina

but have an issue with the speed reading on higher speeds.

Hope I can describe the issue so one can understand:
The BMW cluster shows the max speed on the cluster with 260km/h - the Alpina cluster shows the max speedon the cluster with 340km/h but the needle moves still to the position of the real speed of the BMW cluster.
This means when driving 200km/h the needle on the Alpina cluster shows nearly 270km/h.
To visualize the issue here are the two clusters - so imagine the same needle position describes the issue maybe best:
BMW 200 km/h = Alpina 270 km/h (would be nice if one can trick physics that way )
   
   

Tried to set this two parameters which I found in some cheat sheets

DKOMBI4
3001 KI_Parameter
AG_MPA_MSP_VIEW
from ag_ansicht to mpa_ansicht_330_skala and to mpa_ansicht_260_skala

and

DKOMBI4
3001 KI_Parameter
GESCHWINDIGKEIT_ANZ_Y
from bmw to mpa

but no change of the issue.

Kind of clueless what to change to get the right speed reading on the Alpina cluster.

Any help is highly appreciated.

Thanks

Lars

[mr_nitroz]

code GESCHWINDIGKEIT_EFF_X to MPA as well. Or try to code GESCHWINDIGKEIT_EFF_X and GESCHWINDIGKEIT_ANZ_Y to ALPINA directly

[LdkE]

Thanks - will try

[LdkE]

GESCHWINDIGKEIT_EFF_X and GESCHWINDIGKEIT_ANZ_Y to ALPINA worked perfectly.
Thanks a lot!

Cheers
Lars