[rickynguyen]

Hello,
f5с accepted, VO code 1CR on BDC3, MGU2, IHKA5, DKOMBI8, WAVE but "remote engine start" check box not show on a/c ventilation settings. No FDL due NCD2.0. 

What i need to do more to make this option work.

Thank you.

[marcospoffo]

Hello,
f5с accepted, VO code 1CR on BDC3, MGU2, IHKA5, DKOMBI8, WAVE but "remote engine start" not show on a/c ventilation settings. No FDL due NCD2.0. 
What i need to do more to make this option work.
Thank you.

Wave is not necessary. BDC, KOMBI, FZD, MGU, IHKA, SM2.

[rickynguyen]

yes, 1st code no WAVE, 2nd coded WAVE more but nothing change

[MichaelNRW]

Did you create ncd 2.0 with the modified VO that contains 1CR?
It sounds like the signed ncd doesn‘t have 1CR.

[krolig]

I had a problem with this once, too. I simply forgot that the IHKA now uses NCD 2.0. Check that.

[Thanhnguyen04121991]

Hello,
f5с accepted, VO code 1CR on BDC3, MGU2, IHKA5, DKOMBI8, WAVE but "remote engine start" check box not show on a/c ventilation settings. No FDL due NCD2.0. 

What i need to do more to make this option work.

Thank you.

"No NCD 2.0 means no coding, bro."

[NWBMW]

If it's not shown on MGU check your VO and be sure you've coded all Files within MGU2 with right NCD2.0

[MichaelNRW]

If it's not shown on MGU check your VO and be sure you've coded all Files within MGU2 with right NCD2.0

A little bit late to the рдятy

[NWBMW]

If it's not shown on MGU check your VO and be sure you've coded all Files within MGU2 with right NCD2.0

A little bit late to the рдятy

?