Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
【 Unsupported 】 [Diagnostic] Dr.Gini - B022 - 08 Oct 2018
18-06-2015, 17:04 PM,
Post: #121
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
(18-06-2015, 11:49 AM)mall Wrote:(12-06-2015, 14:26 PM)Tibo Wrote: Hello everyone Hi I parametrer Ediabas.ini ENET as the screenshot the previous post and OBD.ini i dont touch. it is for a f11 not e60 Thank you |
|||
18-06-2015, 18:27 PM,
Post: #122
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
Hello Gini. GAUGES bookmark in my e60 530D from 2005 M57N at all are not supported. Is there a some way to make it work and bookmark ACTUATORS not everything supports. greet
|
|||
18-06-2015, 19:01 PM,
Post: #123
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
(18-06-2015, 18:27 PM)subaru76 Wrote: Hello Gini. GAUGES bookmark in my e60 530D from 2005 M57N at all are not supported. Is there a some way to make it work and bookmark ACTUATORS not everything supports. greet Dear, Kindly Note : Mr. Gini Has Mentioned Many times... That His Software Works Better With BMW Cars Newer Then 2007. Good Luck |
|||
19-06-2015, 14:05 PM,
Post: #124
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
Is it working with E60/E90 with CIC for generating FSC code with D-CAN interface ? ENET cable is for FXX cars. Or for E60/E90 FSC function is working only with ICOM ?
|
|||
20-06-2015, 08:53 AM,
(This post was last modified: 20-06-2015, 09:10 AM by Gini.)
Post: #125
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
(19-06-2015, 14:05 PM)paulgsm Wrote: Is it working with E60/E90 with CIC for generating FSC code with D-CAN interface ? ENET cable is for FXX cars. Or for E60/E90 FSC function is working only with ICOM ? Hi paulgsm, E series, only ICOM F series, ENET and ICOM (18-06-2015, 18:27 PM)subaru76 Wrote: Hello Gini. GAUGES bookmark in my e60 530D from 2005 M57N at all are not supported. Is there a some way to make it work and bookmark ACTUATORS not everything supports. greet Hi subaru76, please post some screenshots of the non working Gauges and Actuators please note that I might need to access your car for fine tuning (18-06-2015, 17:04 PM)Tibo Wrote: Hi Hi Tibo, please make sure : - Dr.Gini is installed in C:\EDIABAS\Bin - copy all the content of C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\Ecu to C:\EDIABAS\Ecu (18-06-2015, 12:14 PM)gerazzo Wrote: Hi Guys, Hi gerazzo, copy all the content of C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\Ecu to C:\EDIABAS\Ecu |
|||
20-06-2015, 12:25 PM,
Post: #126
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
Hy all, many thank first for this soft dr gini...the soft work but i dont know how work the coding any one have a manuals or video to post here ore in youtub....? after i change ccc i lost voice control command anyone know if is possible with this soft to active voice control with soft dr, gini?
|
|||
21-06-2015, 08:19 AM,
Post: #127
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
(20-06-2015, 12:25 PM)raull00 Wrote: Hy all, many thank first for this soft dr gini...the soft work but i dont know how work the coding any one have a manuals or video to post here ore in youtub....? after i change ccc i lost voice control command anyone know if is possible with this soft to active voice control with soft dr, gini? Hi raull00, SI B 09 02 07 Programming/Coding Explanations March 2007 Technical Service SUBJECT CCC: Enabling Code (FSC) Required for Voice Recognition System MODEL E90, E91, E92, E93 (3 Series) with CCC Navigation (SA 609) E60, E61 (5 Series) with CCC Navigation (SA 609) E63, E64 (6 Series) E70 (X5) with CCC Navigation (SA 609) Vehicles produced up to March 2007 SITUATION Progman V25.00.00 or higher prompts the importing of an enabling code during programming. Loss of Voice Recognition System (SVS SA 620) functions after programming with Progman V25.00.00 or higher. CAUSE Enabling codes (FSC) make it possible to link special functions to a vehicle. Without these enabling codes these functions will not operate. In this specific case, the enabling codes must be imported any time the Car Communication Computer (CCC) is programmed in order to ensure that SVS is functioning properly. If the enabling codes are not imported during the programming procedure, the SVS function will not be available. PROCEDURE A special DVD (labeled "FSC" V 1.0) is supplied together with the Progman V25 DVD set. The enabling codes contained on this DVD are for all vehicles with CCC and SVS. After Progman has been installed on the SSS, place the FSC DVD into the DVD drive and leave it there. This will ensure that the enabling codes are available for every Progman session as needed. Refer to the "Procedure" attachment which outlines the procedure on how to import the enabling codes with the SSS. If an enabling code is not provided following this procedure, refer to the "Parts" information attached to this service information. WARRANTY INFORMATION No additional labor allowance, included in the allotted programming time. |
|||
21-06-2015, 09:05 AM,
Post: #128
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
And this DVD with FSC up to 2007 i uploaded some time ago here.After extracting big file
http://cartechnology.co.uk/showthread.ph...light=upto |
|||
Reputation: +1 - Gini [+1] | |||
22-06-2015, 10:44 AM,
Post: #129
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
[/quote]
Hi gerazzo, copy all the content of C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\Ecu to C:\EDIABAS\Ecu [/quote] Hi Gini, I haven't that folder. probably I have to install something? Thanks in advance F32 425d Msport |
|||
22-06-2015, 17:30 PM,
Post: #130
|
|||
|
|||
RE: [Diagnostic] Dr.Gini - Beta Version B010 - 09.06.2015
Hi gerazzo, copy all the content of C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\Ecu to C:\EDIABAS\Ecu [/quote] Hi Gini, I haven't that folder. probably I have to install something? Thanks in advance [/quote] Hi gerazzo, C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\Ecu is the installation location of Rheingold (ISTA/D) Ecu folder |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
E46 cab no diagnostic possible | bmwm3power | 16 | 572 |
11-05-2024, 10:58 AM Last Post: Vojno |
|
coding 2018 bmw bike with ncs expert | carlosabh71 | 13 | 1,609 |
09-05-2024, 14:25 PM Last Post: TheNine90 |
|
BMW 420i B48 (2018) EEPROM/full dump | lagunasec | 2 | 158 |
17-04-2024, 17:07 PM Last Post: lagunasec |
|
bmw f15, x5 2018 | redog4dy | 0 | 148 |
19-01-2024, 08:29 AM Last Post: redog4dy |
|
BMW 2018 F39 - Used BDC installed- HWEL | chrisi1909 | 24 | 1,173 |
15-01-2024, 13:23 PM Last Post: Node |
|
Dr. Gini actived or cracked and one have link please? | rana | 15 | 3,270 |
15-11-2023, 20:19 PM Last Post: tinkerman |
|
A2l hex codes for bmw 2018 m550i | WorkB23 | 0 | 220 |
26-09-2023, 19:50 PM Last Post: WorkB23 |
|
Remote Diagnostic | Qwerti | 16 | 4,102 |
28-03-2023, 14:27 PM Last Post: DarkSide |
|
Bmw g31 2018 MGU id7 retrofit. | LogiHuś | 0 | 331 |
26-03-2023, 20:57 PM Last Post: LogiHuś |
|
BMW Road Map Europe West MOTION 2018-1 | Dany | 3 | 412 |
19-03-2023, 08:31 AM Last Post: dumitru.o |
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content