[gvitkis]

Hello to all
I have a problem with CIC e90, I'm trying to bring back to V41, I followed the guide of the master ap90500. Everything worked perfectly for FLASH CIC_C63 (CI63F1)
Now I have problems with the FLASH of CIC_C62, I do not know what data, programs and in particular NAAB insert to continue the FLASH
I enclose a picture of my DATEN V41 of the CI62F1 folder for E89.
I hope you can help solve the problem.
Thanks so much.

[atomantmk]

Hello to all
I have a problem with CIC e90, I'm trying to bring back to V41, I followed the guide of the master ap90500. Everything worked perfectly for FLASH CIC_C63 (CI63F1)
Now I have problems with the FLASH of CIC_C62, I do not know what data, programs and in particular NAAB insert to continue the FLASH
I enclose a picture of my DATEN V41 of the CI62F1 folder for E89.
I hope you can help solve the problem.
Thanks so much.

Those files are needed for address 62:

-PABD = 08010408CI62F1.ipo (be carefully, do not choose CM62)
-P-SGBD = 33CI62F1_10.prg (be carefully, do not choose CM62)
-ECU-adress = 62
-Data = A9257174
-Program = 9257170
-NAAB = H020270_0202J5

for address A0:

-PABD = 08010408CIA0F1.ipo
-P-SGBD = 33CIA0F1_10.prg
-ECU-adress = A0
-Program = 9257170

[gvitkis]

Hello to all
I have a problem with CIC e90, I'm trying to bring back to V41, I followed the guide of the master ap90500. Everything worked perfectly for FLASH CIC_C63 (CI63F1)
Now I have problems with the FLASH of CIC_C62, I do not know what data, programs and in particular NAAB insert to continue the FLASH
I enclose a picture of my DATEN V41 of the CI62F1 folder for E89.
I hope you can help solve the problem.
Thanks so much.

Those files are needed for address 62:

-PABD = 08010408CI62F1.ipo (be carefully, do not choose CM62)
-P-SGBD = 33CI62F1_10.prg (be carefully, do not choose CM62)
-ECU-adress = 62
-Data = A9257174
-Program = 9257170
-NAAB = H020270_0202J5

for address A0:

-PABD = 08010408CIA0F1.ipo
-P-SGBD = 33CIA0F1_10.prg
-ECU-adress = A0
-Program = 9257170

Thank you so much.
If you look carefully at the images I attach to my DATEN V41 E89 CI62F1, CIA0F1 folder, there are no such data

-Data = A9257174
-Programma = 9257170
-NAAB = H020270_0202J5

Why are not there? How can I continue?

[atomantmk]

Thank you so much.
If you look carefully at the images I attach to my DATEN V41 E89 CI62F1, CIA0F1 folder, there are no such data

-Data = A9257174
-Programma = 9257170
-NAAB = H020270_0202J5

Why are not there? How can I continue?

Download and flash...

[gvitkis]

Thank you so much.
If you look carefully at the images I attach to my DATEN V41 E89 CI62F1, CIA0F1 folder, there are no such data

-Data = A9257174
-Programma = 9257170
-NAAB = H020270_0202J5

Why are not there? How can I continue?

Download and flash...

Thank you so much
For CIA0F1 how to proceed?

[atomantmk]

Thank you so much
For CIA0F1 how to proceed?

To flash ECU_ADR A0, go to C:\Ec-Apps\NFS\DATA and erase folder develop and folder develop_a0 rename to develop

Select Expert Mode

-PABD = 08010408CIA0F1.ipo
-P-SGBD = 33CIA0F1_10.prg
-ECU-adress = A0
-Program = 9257170

WinKFP will complain about incorrect files and other things when you select the files, just ignore the complaints.

On this module you can't select Data or NAAB, just select Program and then select Done.

Choose Program Program. It takes around 30 minutes to program A0

Your CIC is now alive

If ECU A0 show ERROR_ECU_REQUEST_CORRECTLY_RECEIVED_RESPONSE_PENDING open Tool32 and load your CCC_xx.prg and run SET_END_SWL

After programming, code your CIC with NCS Expert

[gvitkis]

Thank you so much
For CIA0F1 how to proceed?

To flash ECU_ADR A0, go to C:\Ec-Apps\NFS\DATA and erase folder develop and folder develop_a0 rename to develop

Select Expert Mode

-PABD = 08010408CIA0F1.ipo
-P-SGBD = 33CIA0F1_10.prg
-ECU-adress = A0
-Program = 9257170

WinKFP will complain about incorrect files and other things when you select the files, just ignore the complaints.

On this module you can't select Data or NAAB, just select Program and then select Done.

Choose Program Program. It takes around 30 minutes to program A0

Your CIC is now alive

If ECU A0 show ERROR_ECU_REQUEST_CORRECTLY_RECEIVED_RESPONSE_PENDING open Tool32 and load your CCC_xx.prg and run SET_END_SWL

After programming, code your CIC with NCS Expert

-Program = 9257170, This also does not exist in my CIA0F1 folder for E89
I attached image in the previous post of the CIA0F1 folder
I do not understand why this data in my folder DATEN V41 CI62F1 and CIA0F1 for E89 do not exist.

Instead in the CI63F1 folder there are all the correct files

-ECU-adress = 63

-Data = A9257174

-Program = 9257170

-NAAB = H020270_0202J5

[smilo]

Someone knows why the CIC reboot alone after the flash to V41 made and Combox installed ?
Except this issue, all works fine.

- E70 with CIC installed with a CAN filter + Combox

[jeroenbmw]

Why should you flash to V41?

Make FSC on your VIN, flash unit to latest I-level, when you put your own custom made FSC into CIC apps will work, there is no need to flash it to V41

Emulator is only needed for PDC+Rearcam protocol, but you need to have the right emulator for this, not all emulators have this functions

[smilo]

Why should you flash to V41?

Make FSC on your VIN, flash unit to latest I-level, when you put your own custom made FSC into CIC apps will work, there is no need to flash it to V41

Emulator is only needed for PDC+Rearcam protocol, but you need to have the right emulator for this, not all emulators have this functions

So it’s probably the V41 that cause the reboot problem ?